DICKY

pics before install http://www.skeleton.net.nz/~ben/Oth...ne/E...ne/DSC00271.JPG

its been 30 months now, can't wait to hit the road again http://www.skeleton.net.nz/~ben/Other%20Pa...ne/DSC00271.JPG

mail sent

Keith my set up is very similar to yours drag radials hks drag suspension 1.5 cusco front & rear 900 odd ps (t51 r, giken rb 30, jun INT 69-11.35 BC 29 EX 68-11.35 BC29 cams) midori top front adjustable camber mounts cusco rear adjustable camber urethane rear sub frame mounts I realize that I am cheeky asking BUT I would really appreciate it if you would give me an idea of what camber, caster, toe in, damper setting's & ride hight to run, also tire pressure's. we should be firing up the car this week, unfortunately it will be a couple of months before it hits the track due to other commitments & the fact that its winter down here.Being a brit I have spent many a good weekend at the 'pod' do you remember the houndog funny car ? or Sammy Millar running a sub 4 sec quarter in his rocket ? about 1980, probably before your time ! thanks- John

I have an hks etc with drag adaptor, with this unit you can set it up to automatically reduce bias to front after a set distance.

97, diff, front bar,standard intercooler [email protected]

please !

oh fark, I have a 'yet to be run' 1.5 cusco rs front diff !so what front diff is best ?

required now [email protected]

thats a good answer

if you were going mountainering would you buy cheap rope ( "the cheaper the better") think about it

so never been on a dyno ? think how much more is there to be had ! I hope a/f ratio is safe

wanted drivers air bag for a 97 supra [email protected]

what a great looking car, I am about to have a giken rb 30 powered 32 finnished so am looking forward to seeing some reply's to this thread

BET U FEEL A BIT OF A PLANK RIGHT NOW !!!

[email protected]

I am trying to locate a crank angle sensor for a nissan sr20 det, this is in a 94 silvia turbo with a black top engine.If you cannot supply any advice on were I could locate one would be much appreciated. thanks John kitley vehicle clearance & liquidations christchurch nz [email protected]

THANKS I cannot belive that I have just given away a 'T' pedal box !

After many months my giken rb 30 is ready to go into the 'hole' trouble is that due to this engine being taller that stock the inlet manifold/surge tank does not clear the clutch master cylinder ! does anybody have pics of keir wilsons 'set up' or have a contact for him, or has anyone got a good solution to this problem ???????????????? thanks John.

How To, With A Dog Box ??? -------------------------------------------------------------------------------- I am building(WITH A LOT OF HELP) a street legal gtr for drag that should make a 1000 hp, whilst I realise that a sequential box would be preferable, my pocket will only go as far as the semi helical trust 6 speed that I already have, alas, its rated at a modest 800hp ! I have driven fairly hard with this box but never without the clutch, any tips please ? I am concerned that when I 'let go' of the gas to shift that boost will drop off ? so, I was going along the lines of enabling the motec to cut the ignition whilst I flat foot change ? whilst I realise that the tuner can easily achieve this with the motec, is it feasible with this trans ? has anyone got any experience in this department ? thanks John

yes

kidney sid good read mate, just for the record, croydon went 8.55 with 6 throttle body's

dean please reply to my email regarding the money u owe me

dean please reply to my email regarding the money u owe me

dean please reply to my email regarding the money u owe me