backdog

Price drop. $8500.00 ono

ITS DONE 155000KMS, NO RUST EVIDENT, HASNT HAD A FRONT ENDER ITS JUST A LITTLE LOW SO WHEN I TOOK IT TO GET THE TUNE IT SCRAPED ON THE CAR TRAILER. THE CAR OWES ME $17 000 I KNOW 9K IS A BIT BUT I AM NEGOTIABLE

FOR SALE IS MY R32 GTST SKYLINE M SPEC WITH WORKING SUNROOF HEAPS OF MODS AND HAVE RECEIPTS FOR THEM FRONT MOUNT INTERCOOLER POD FILTER WITH CUSTOM AIRBOX Z32 AIR FLOW METRE HYPERGEAR SS1 TURBO HKS INJECTORS HKS FUEL PUMP SPITFIRE COILPACKS WHOLE NEW EXHAUST SYSTEM INCLUDING DOWN PIPE AND HI FLOW CAT SHORT SHIFTER 18x8.5 RIMS WITH KUMHO KU36 80% TREAD TIEN COILOVERS HEIGHT ADJUSTABLE DBA SLOTTED FRONT ROTORS NISTUNE CHIPPED ECU TUNED BY DVS JEZ RUNNING 216RWKW AT 17PSI. 10 MONTHS REGO AM OPEN TO OFFERS WANTING AROUND $9000.00. PLEASE GIVE ME A CALL 0431 924 710.

FOR SALE IS MY R 32 GTST M SPEC. LOTS OF MODS INTERCOOLER NEW TURBO HYPERGEAR SS1 NEW HKS INJECTORS NEW HKS FUEL PUMP DRIFT POD FILTER SLOTTED FRONT ROTORS DBA Z 32 AIR FLOW METRE BRAND NEW CAT BACK HIGHFLOW CAT NEW DOWNPIPE SHORT SHIFTER NISTUNE CHIPPED ECU TUNED BY DVS TUNING RUNNING 216RWKW AT 17PSI. TIEN HEIGHT ADJUSTABLE COILOVERS 18x8.5 RIMS WITH KUMHO KU36 WITH 80% TREAD. ASKING $9000.00 BUT AM OPEN TO OFFERS AND INSPECTIONS, PLEASE GIVE ME A CALL OR SEND ME A MESSAGE 0431 924 710.

Standard T3 turbo off R34 gtst. Good condition. Got pulled off a mates car that was upgrading. Had done about 60,000kms. Has also got the bent pipe that comes off compressor outlet, and wastegate. $450 firm... ph:0417292976 (in sydney, pick up only)

St Clair Sydney...

92 HR32 GTS-T 5 speed manual, 138000kms. 12 months rego... High flow turbo, Front mount intercooler, full 3" exhaust/ hks muffler, Wolf 3d computer (with handset), Turbosmart e-boost, turbo timer, alarm, pioneer c.d. Well looked after regularly serviced. Price: $11,000 Location: Sydney Phone Kev: 0417292976

could be a blocked cat converter/ exhaust, how old is the current one?

Whenever i first start my r32 it runs rough (sounds like its dropped a cylinder) it only happens for about 1 minute max before it irons itself out and starts running smooth. any ideas?

the dyno run that has been done (not tune just a power run) said AFR's sat on about 11:1 at full boost. Is this to rich? thanks for the info guys, i think a tune is first thing i should do.

Ive just purchased an R32 gtst. It is the second one Ive owned, the first one was stock as a rock (exept small boost increase) My current one has full lenght 3" exhaust, hi-flow standard turbo, front mount, wolf ECU and 16 psi boost and makes 180rwkw. The thing is it doesnt seem much quicker than my old one. I was expecting to roll on boost in second gear and just start frying the tyres, but it just doesnt have the balls. I have been in another gtst with 220rwkw and it felt real fast. Is 40 extra kw that big of a difference?

hey mate just wondering if the r32 bar is in good cond. And if you would be willing to freight to sydney

thanks for all the help guys. thinking about my budget i might as well stick with the rb20, i just didnt want to do the mods and have the bottom end shit itself. my motor has 115000kms on it and when i got the car it was boosting to 15psi so i thought the rings may/should be replaced. What i want from the car is a daily driver that can still manage consistent low 13s (and i do rack up the kms) Are these engines as bulletproof as everyone makes them out to be. I guess its all in the tuning. should i go for an aftermarket ecu straight up and save the hassel later? i dont want anything overly powerfull cause then the rest of the drive-line suffers (trans,diff,driveshafts,ect) just want to blow a v8 every now and then.

Ive got a 32 gtst, and about 4-5 grand to spend on it. just wondering if the guys puttin big turbos on the rb20s are replacing piston rings (or pistons) when they do this? Beacause im thinking if i have to do rings/pistons, turbo, cooler, ecu, and fuel system would i be better off selling the engine and putting in the 2.5lt. or should i go rb30 bottom end with my rb20 head for the extra torque, does anyone know how much machining is involved in fitting the head and who does it (sydney area) just want to get as much feedback as i can before spending the dosh. anyone who has done mods on a similar budget let me know what you did and how it worked out. thanks