a1091156

Well, out comes the secret weapon I've had stored for a while..... For Sale: GENUINE - HKS - Bar & Plate - Intercooler Item Condition: New & Unused. Dimensions: 410mm x 260mm x 5" Inlet & Outlets were 2 1/2" ID for a length of 2" so 2" was cut from each side and an alloy weld run on the edge of both sides. This allows the hose clamps to then actually clamp the hose down without it sliding/blowing off :lol: (Still have the cut-offs stored, if buyer wishes to hang onto them too) Hi-temp 60% Aluminium based 3M 'Flat Black' coating was then used to paint the Intercooler. The endtanks were painted in a few coats. The core was then sprayed just enough to cover its silver appearance at 30 degrees and 60 degrees parrallel to its face. Therefore only protuding an inch at the most into the core itself. Overall, this keeps the Intercoolers effciency unchanged and helps keep Police and scumbags away :evil: Extra Info: Officially rated by HKS @ 1000HP. Correctly rated by myself back down to 700HP. I'm sure it it will be able to flow 1000HP worth of air @ 40psi, but there is no way it can physically cool it down to an acceptable temperature with only so much frontal area......... Hence this going on the market and another Air/Air Intercooler on its way To those thinking about going Water/Air Intercoolers, ask yourself is the 1.1psi pressure drop at ONLY 7psi really worth it ? Imagine the drop at 30-40psi........ Pictures: Price: Cost me $935 direct from Japan avoiding Customs Duties aswell........will happily let it go for $740 including Registered Postage with Insurance Australia-wide, less Postage if collecting in person Please don't try to tell me how this compares to the eBay Bar & Plate Intercoolers..... This FMIC weighs only 9Kg (Including its Cast-Aluminium end-tanks - with flow design being more critical then weight here......), that for its overall volume will be less then anything you can find on eBay Contact Details: Luis, Mail: luis D0T miranda AT student D0T adelaide D0T edu D0T au , No: 0421 024 445 (Msg me as I don't answer unknown numbers........ ) Location: South Australia Delivery & Conditions of Delivery: Pickup preffered to avoid time in packaging, sending etc. COD is available with a 25% deposit required in advance though.

Item: 1x TD07S-25G Compressor wheel only ! Very cheap upgrade for anyone running a 20G Turbo, or anything less then a GT37 82mm Exducer (Excluding the GT35Rs aswell). Condition: New & unused, still to remove from Turbo, so can show pics of clean Exhuast Housing and short (yet to be modified) wastegate actuator = implying definately unused, none of this bs run on dyno, still clean so = unused Details: Flows - 65 lbs/min (650Hp), Inducer: 60.48mm, Exducer: 78.05mm Pictures: Will be posted tomorrow with maybe a few more after Price: $355 incl Express Postage, or add an extra $4.80 for Registered Postage which will inlcude full Insurance. Location: South Australia Prefer Pick-up, to save time on packaging & sending etc. Can send via C.O.D but will want a $60 upfront deposit, with the remaining $295 + $8.50 (Australia Posts' C.O.D Fee) to be paid on collection. Contact details: Luis, Mail: luis DOT miranda AT student DOT adelaide DOT edu DOT au No: 0421 024 445 (Msg me as I don't answer unknown numbers )

Offers are ending in 6 Hours everyone !

1 day to go :looney:

Offers will close Thursday night............

2 days to go :headspin:

Highest offer is $1725 so far.......will be sold by Thursday night at that price if no higher offer is made !

3 days to go.......

Give me a call tomorrow morning on my Mobile !

Here's some specs Compressor Wheel: 34D Inducer - 69.7mm Exducer - 95.0mm Turbine Wheel: T88 Exducer - 72.3mm Major - 85.0mm

Just bearing modifications to help spool-up quicker than original.

Specially modified by Turbonetics in the U.S.A ! Taking offers ATM, will seriously consider any above $2000, but will only sell to the highest offer Will prefer Buyer to take a return trip/ticket 'IF' from Interstate to inspect and pay. Located in South Australia Either call or pm me > Mobile: 0421024445 NB: Forum Rules were followed in posting this ad so...................

How well do these run on stock GTRs' ?

edited.

Here's the link > http://cgi.ebay.com.au/ws/eBayISAPI...2477115625&rd=1 Any questions, feel free to ask ! I am not a contributing member to this Forum but would like to feel that by offering this product at a once in a time low starting price and informing any Skyline owners who may be sick of 9 sec rotaries :goddam: , that you can leave this post up for anyone who may be seriously interested ! Thanks in advance :uh-huh: