Rossman

i ageree with blind_elk had same problem with my r33. careful tightening the screws tho as i did mine too tight and broke away the part that joins the 2. had to then use a bonding agent but after that never had any troubles

Thanks for your help ben and for the pics too. unfortunately, although my temp sensor is showing a code in diag mode, i am thinking that it is unrelated to the problem i am having with my radiator fan not operating. today i removed my temp sensor loacted at the bottom drivers side end tank of radiator and tested it. at ~96 degrees celcius i had perfect continuity thru the sensor to the 2 pins at the end of the connector. in the fuse box in engine bay i tested all 4 ports for relay and all are ok. wiring and ground circuits are all ok. all i can think of now is that the rad fan is not supposed to come on when the a/c is turned on as i have read in another thread where some clever fella has put a DIY on installing a diode so the fan will come on with the a/c. thoughts on this please. thanks, - ROss.

thanks BH_SLO32, can u please tell me wire colours and a picture if possible of the engine temp sensor as im not too sure where to look for it. you think that sensor is the failed sensor that the a/c diag mode is telling me about? thankyou. - ROss.

ok cheers guys, i had the coil re-wound by RAPID REWIND Brisbane QLD (behind sailsbury wreckers) 3875 2498 for those who need it in the future. anyway, a/c working fine now!! only one prob: radiator/thermo/aux fan not cutting in. fan does not even work when engine is at operating temp. all wiring to fan is fine relay is fine fan is fine fan will work when correct switches in relay are bridged. i self tested my a/c system with the diag mode logged code 23 - Water temperature sensor so im thinking new sensor and it'll be fine? water temp gauge works by the way any thoughts be greatly appreciated. cheers - Ross

approx 2in lower with springs.... price of freight not sure

still for sale guys...

this DIY was very useful as i just had my coil windings re-wound. compressor goes back in this weekend, hopefully all will be sweet once the system is gassed up early next week. for those in need of a place who will re-wind the coils i highly recommend. RAPID REWIND located Rocklea, Brisbane, QLD. (07) 38752498 ask for MARK - very friendly and helpful guy. - ROss.

more parts added... still items for sale.

updated!! bits still for sale

updated!!

SOLD- R33 Stock bov from Series 2 removed from engine at 70,000kms in good working condition $40 - R33 Stock 'yellow' side indicators with clear bulbs $20 - Stock r32 gtst spoiler, M SPEC, good condition, brake LED's all working $50 - r32 factory fog lights for front bar $90 SOLD - r32 stock bov $30 all parts available for pickup mt gravatt, brisbane. willing to post interstate at buyers expense. cheers - ROss.

not sure about gtr offset mate or offset of the wheels, sorry. would prefer a local sale...

bumpity~

hey mate u got r32 center dash vents? i will pick up today with cash!! im in bris. You have PM also

$200 are you for real? your not in bris? thanks - ROss

u got the suspension or not?? if not dont waste my time by posting. thankyou

i know heaps of people have aftermarket coilovers in the r32's so someone in brisbane please let me take your stock suspension off your hands. willing to pay up to $80 for a set in good condition with no knocks/leaks from shocks pickup TODAY!!! cash in hand thanks. - ROss.

i know heaps of people have aftermarket coilovers in the r32's so someone in bris please let me take your stock suspension off your hands. willing to pay up to $80 for a set in good condition with no knocks/leaks from shocks pickup TODAY!!! cash in hand thanks. - ROss.

ok thanks mate

im aware this was posted ages ago but nice work mate! thanks a million, your a life saver. gonn do this 2morrow> cheers - ROss

ok, looks like im after a new clutch master cylinder for r32 gtst anyone know where to buy (does repco stock?) and approx how much? part number would be great. cheers - ROss.

thanks for your help guys.... where to get the coils re-done and how much? im in bris cheers - Ross

Found fluid on my left hand side foot rest block in my r32 gtst. got a torch and had a look under the dash to see what it was. the fluid appears to be coming thru the firewall from the clutch fluid master cylinder, running along the push rod and then leaking down the interior side of the firewall down to the carpet. vehicle is fitted with a twin-plate clutch and pedal is rock hard to push down, would that be cause of problem/contribute to problem? has anyone had this problem before?? how to fix? im thinking clutch master cylinder has shot a seal/ O ring? hard to get master cylinder out/in ? any help would be great. thanks guys - Ross.

vehicle: 93 r32 gtst today i was messing around with my air conditioning, trying to get it working cauz its so damn hot! found fuse 8 in the fuse box under the dash to be blown... was a 10amp fuse. replaced it with a new 10amp fuse, started the car and turned the a/c on. a/c compressor kicked in, then stopped! checked fuse again...BLOWN :-O checked out the wiring to a/c pressure switch...connector all dirty and dodgy looking. cleaned the connectors up and checked continuity thru the connector, was all ok. had no 10amp fuses left so replaced fuse 8 with a 15amp fuse. for about 25 mins the a/c worked perfectly until a very slight burning smell started to form somewhere in the engine bay (no smoke visible) then as expected the a/c compressor stopped and the 15amp fuse was blown!! thats where i am at now, if any one has any sugestions or knows the problem please feel free/help me! thankyou -ROss.

found out what one it is! thanks