Ed G

could it be the stock bov?

yeah, grabbed some clamps on the way home las nite... will stick them on this arvo and test it

afm is plugged in... will check all the hoses i can tonite.. checked all the i/c plumbing and it's all on correctly (except the one with no clamps....) will check the rest 2nite.... any other ideas?

yeah there is one section of intake (hot side of the cooler just after the turbs) hose without any hose clamps on it, but i didnt think this would affect the idle... when it reaches +ve it starts to affect things.... there are so many damn vaccume lines without clamps on them too I think it's going to take me a while to find it if it's a leak... the motor is currently sitting in a front cut.... one other thing i was thinking could be affecting it... the only exhaust on it is a 3" dump... no cat (the car is chopped at the a pillar).. and if the 32 is the same as my s13, there would be a O2 sensor on the cat correct?

Hi, Picked up a RB20 front cut on the weekend.... started it up in my garage las nite... the damn thing is running so rich and idling like a dog... whereas at the place i picked it up from it was smooth as! The only thing that I can think is different is the fuel pump I have, it's a denso around the 255lt/hr mark. The dude told me that the injectors would struggle with it and I would need to get a new fuel reg. I had this pump on my SR20 with no mods the anything on the fuel side of things and it ran fine.... am I barking up the wrong tree by thinking it's the fuel pump? Thanks, Ed.

Hi need to buy or borrow (for a couple of weeks) in Bris area 2 std 32 gtst wheels to pust a front cut around.... can anyone help? thx Ed

220 for the injectors... no resistor... looking for one now

Looking forward to seeing this result... just went and got me a set of gtr injectors

I have one, but it has a crack in the top (like all of them)......

you've got mail

are you saying... 200 for in and 200 for ex making it 400 for the cams ??

how much for the cams?

replied

wow this is an old post ... heh pm'd again

As above... after GTR Crank and Rods in good condition...

will it fit a rb20 ?

is the wiring harness complete ? ie not cut ?

pm'd