Jump to content
SAU Community

Ben C34

Members
 View Profile  See their activity

  • Posts

    9,994

  • Joined

  • Last visited

  • Days Won

    66

  • Feedback

    0%

 Content Type 

Everything posted by Ben C34

  1. Ben C34
    Were the new lifters you bought genuine? Seems odd that they all didn't behave. Glad it's sorted now.
  2. Ben C34
    It's the least likely scenario that the fault is with the ecu, I'm betting it won't fix it.
  3. Ben C34
    Is not normal to replace turbo bearings at home. Especially when you don't know what you are doing. Don't do it.
  4. Ben C34
    You pressure test to find leaks. If there is a leak in the cooler I would get it welded.
  5. Ben C34
    Of course I would agree it could possibly be the afm as I already suggested that.
  6. Ben C34
    Doesn't matter. It's a coil. That's why both wires are black.
  7. Ben C34
    Clutch fan no worries. There's certainly not a rule of have to go to thermos when changing radiator.
  8. Ben C34
    Your question is one of fact, not opinion. You don't need an opinion on whether the rotors are the same size. You need the facts. Something a catalogue can give you. As you crave an opinion...... Don't bother. Save money. Buy decent car.
  9. Ben C34
    Checking the hardness of the fuel line won't tell you anything, that's what a fuel pressure gauge is for. Obvious things to do are clean afm and check for boost leaks. Aren't you the guy with the rb20 turbo that glows red all the time, drives hard everywhere and just got car out of impound?
  10. Ben C34
    What's a ptu?
  11. Ben C34
    I assume he was doing high speed river crossings
  12. Ben C34
    Woah.
  13. Ben C34
    Mistakes do get made with rego. My dad had a motorbike for years then realised that the number plates weren't correct to the papers, two letters were swapped. This seems like an odd situation though.
  14. Ben C34
    Winning.
  15. Ben C34
    Sorry man. Too early for me......
  16. Ben C34
    2. Because there is no vct feed.
  17. Ben C34
    Cast iron. There's some info on the block..... Any more required?
  18. Ben C34
    It's not rocket science. Check to see of the motor is getting power when you push the switch. Work back from there.
  19. Ben C34
    Shame to see you are parting it. Good luck with it all.
  20. Ben C34
    Check you are getting 12v to the coils.
  21. Ben C34
    When I install new hydraulic lifters I soak them and pump them to bleed them in diesel.
  22. Ben C34
    Phillips is stock.
  23. Ben C34
    Which is a re branded mac valve....
  24. Ben C34
    You should always check for leaks after messing with the pipework.
  25. Ben C34
    None of the rb26s has vct. Rev it higher because racecard.
×
×
  • Create New...