Jump to content
SAU Community

Ben C34

Members
 View Profile  See their activity

  • Posts

    9,994

  • Joined

  • Last visited

  • Days Won

    66

  • Feedback

    0%

 Content Type 

Everything posted by Ben C34

  1. Ben C34
    Couldn't hear the dose?
  2. Ben C34
    Wut?
  3. Ben C34
    Yes, now you have got it. the other thing is a damper, not a reg. Never knew it was a one way valve as never plumbed one up backwards!!
  4. Ben C34
    That's backwards, feed goes into the rail, return is out of rail
  5. Ben C34
    The fuuel flow is to the rail then the reg, which is why I have suggested the plumbing error.
  6. Ben C34
    Sounds like a plumbing issue. Are you sure it's plumbed correctly?
  7. Ben C34
    What did the plugs look like? An egt gauge is not particularly useful...
  8. Ben C34
    You sure it's plumbed the correct way around? If the pump "wasn't enough to open it" how would the feed line go hard with pressure?
  9. Ben C34
    https://www.enginelabs.com/news/spooling-up-tuning-dohc-variable-valve-timing-for-boost/
  10. Ben C34
    So the hp a ademy thread basically confirms advancing the intake cam improves low to mid, and the ha motorsport info I reject!
  11. Ben C34
    You are the only one eve lr to recComend that. As for the retard inlet bit in particular that makes no sense as people with rb26 spend heaps of cash to get vct to advance the intake cam to improve boost response. Do you have any examples of your theory?
  12. Ben C34
    what does that mean?
  13. Ben C34
    That's advanced. Normally you would advance the inlet and retard the exhaust. So that is weird. I would be putting it back to zero for sure.
  14. Ben C34
    Well thats good you found it but a mystery as to how it gets in there. now get poking anal stick (to find the answer.)
  15. Ben C34
    Well that sucks,.... Head gasket or worse?
  16. Ben C34
    Proper dose brings us together as people.
  17. Ben C34
    No one has ever done that before so no one knows. LOL jk. Go to the forced induction section and have a look there. Nom Nom Nom
  18. Ben C34
    What bolts did you use? Not that it really matters, no need to re torque
  19. Ben C34
    R32 impressing old guys R33 impressing wierdos R34 impressing the ladys Think I got it right. Can close thread now.
  20. Ben C34
    ? was it all from the same company?
  21. Ben C34
    Could be. Those aem nozzles use a 1/4" push fit, what diameter tube are you using? 6mm tube fits and will pretty much fall out.
  22. Ben C34
    That sucks man. Hopefully all is well with insurance etc
  23. Ben C34
    How did you test that? When I did it no way would it light. I used a spray bottle onto a flame and it always put it out.
  24. Ben C34
    It's pretty obvious that's an engine out job. If in budget get another cheap running engine and Slap it in.
  25. Ben C34
    It's certainly not a gravity cancelling valve!
×
×
  • Create New...