nzkiwi121
-
Posts
8 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by nzkiwi121
-
hey man ive just ran the head and block numbers, the head has 08U writtten on it witch is the r32 rb25de head and it has 75T on the block witch is a r33 rb25det, so I do indeed have a rb25det in there, question is can I still run the rb25 neo ecu with it? cause it looks like its running the rb20 injectors etc...witch are top feed anyway
-
hey man, ive got a picture of the intake manifold bolt pattern, ive been doing some research and as far as ive got is thinking this engine may not be a rb25 but a rb20....it has red temp sensor on the radiator hose, looked up the CAS model number and its saying its an rb20 one...but it seems to be running indivdual coilpacks and I know the rb20's never had these, ive attached pictures of it, see what you think...
-
hey man we just took the intake manifold off the neo and found out the bolt patterns are different on the neo one compared to the s2 engine? and the injectors from the neo wont go into the s2 manifold either cause like you say they are different...what have I done wrong here? like you say they are interchangable but they arent witch is wierd, is it a different head on it maybe?
-
awsome man thanks a bunch, ill end up doing the swap over this weekend and ill let you know how we get on
-
ohk sweet as sounds good, apparently its running on 8psi atm so if i got it a tap for the gate i could turn it up to 10psi and see how well it goes, so im guessing if i put the neo inlet manifold on it, it will bring the injectors over as well? cause i hear the neo's are top feed ones? or bottem correct me if im wrong, also will it run the neo CAS? heard they are different on both engines?
-
ohk the r34 had a rb25de neo in it not turbo if you got confused, so id have to move all the sensors etc over from the neo to the s2, the injectors wont be turbo spec would they? and would the manifold fit on the s2? after ive done all of that do I just cut the plug off the engine loom and solder on the s2 det ecu or run the neo ecu? cause they both have different plugs..
-
got the engine cheap so why not, ive just put the engine on, bolted up straight to the neo's gearbox and used the clutch/flywheel witch is excedy onto the s2, but ive come to the ecu loom wiring problem now, ive got a r33 loom for it, can I just take the r34 one out and put in the r33 one? what things will I have to wire up differently? thanks
-
hi guys, I'm new to the forum, hi everyone :-) lol, I've got a rb25det s2 engine I wanna put into my r34 witch has a neo engine in it, was wondering am I able to use the 5 speed manual box from it and the diff and drivetrain? will be able to use the rb20det clutch I have for it on that box? also wondering what else from the neo engine I can transfer , thanks guysguys
