Trex

Kudos Motorsport. What are they? Like $99 each for either genuine or splitfires. Can't go wrong with splitfires or genuine.

It's a ballast resistor. Perfect package for the gtt or gtst with a new rail from my research.

It's a ballast resistor. Perfect package for the gtt or gtst with a new rail from my research.

Golebys parts - gates belt, tensioner, nsk idler, 2x cam seals, crank seal - $180 Kudos - genuine pump - $160 Ebay - gates 3x ancillary belts - $60? I contemplated a gates pump as their pressure lines, belts etc are amazing and are used on all big machinery. But after a lot of research it seems aftermarket pumps are a lucky dip. For an extra $100 you could have had a genuine pump that will have no problems.

Something I've been working on

Would it be possible for you to find out the product?

dont forget to pay mine too.

S1 AWD C34; My findings FRONT CALIPERS; 32GTR non vspec Calipers work and use 12mm od bolt that is roughly 55mm long 33GTST calipers work but use 12mm od bolt that is roughly 35mm long S1 C34 calipers use a 14mm od bolt that is roughly 55mm long - Cannot be used in the 32R or 33ST calipers. REAR CALIPERS; 32-34 are interchangeable and will work on all 32-34 rotors. Initially i used electrical tape to wrap the 32GTR 12mm bolt to a 14mm od so when positioned in the hubs dogbone it will not move. I have put a fair bit of heat into these brakes so far and have found the tape has held up fine. This sounds extremely dodgy, but this was also used by duncan years ago and his has also held up fine. Now i have 12mm id to 14mm od pipe from a hardware store from overseas if you google like I have done. Should be around $8-20 to your door. Or scottym35 sells them already cut to size for ~$60 but it isn't worth it. 32GTR rotors shoudln't be used with 33GTST calipers as the 32 Rotors are 2mm wider, I am using 32GTR rotors, but had to rub the pads down a little on concrete, rubbing pads down on concrete is a normal thing when fitting new pads to rotors, so i dont see a problem as long as you have a flat surface to begin with. The FRONT dust shield on the stagea needs to be trimmed or bent back where the caliper bolts to the hub as the edges of the caliper will hit the plate. The REAR dust shield needs to be cut off completely as the 32-34 rotor is roughly 20mm larger in diameter than the stageas. If using 33GTST FRONT lines you need to consider whether you want them to sit in their original position or are fine with them being metal cable tied out of the way. Using 32GTR REAR lines is fine. These are my findings. Check out chrisfix on youtube for some great how to videos on bleeding brakes etc.

Have a few things i need gone asap. So throw me an offer. sold

Yep. I take the caliper off, hold the pad in place and use a G clamp. Have also used adjustable pliers in the past.

quick search and i found this, not sure how well it would work. I've had my pads out about 4 times in the last 2 weeks (because of squealing issues) i can't see any other way except for taking the caliper off, or possibly using that tool if it works well. Also very interested if there is an easier way.

I agree. Camry would demolish a skyline and supra. That's why they won car of the year every year.

time for a stagea.

You called it in your first post van dam.

ordered a few parts. timing belt, bearings, springs, seals, cam gaskets, ancillary belts and a few other things.

skid vids?

That's sort of my point. I understand most events around canberra are word of mouth, but those events are staying afloat from regular attendees. An update on their website and Facebook is all that is needed to get people ready for an event

I can't find any information on any track days since March of last year. Where are you getting your Info from?

I wanted to hear his reasoning lol

Why is the location odd?

nah, it was red.

They're only twin piston. 34GT.

thats very intersting. and good news that they both abstained from further use!

Have you seen your patient since the original post Terry? How is she going? I'm interested in your patients who have had long term narcotics use and are in the remission faze. Are they all similar in regards to their feelings and their behavior?