Toshi

You need wideband A/F meter and some tools for check ping (eg; S-AFC2). This is minimum tools.

Thanks simpletool , stenve and Tangles. I appreciated your thread! Hi Cam84 I am able to remap std ecu. Im not too sure how much gain but normally 185- 200kw. Please check out this is thread. http://www.skylinesaustralia.com/forums/Re...ml&hl=toshi

S1 and S2 diffrent throttle senser. S1 ecu and S2 ecu is diffrent program.(almost same map but progam is totaly diffrent) Engine will start but ecu is not working properly.

It'd be better if you go to dyno after you recieve the remaped ecu. Since I cannot site the condition of your car, fitting chip can be potentionally dangerous at full boost. So I ask customers to go to dyno straight after recieving the ecu to check ignition timing , AFR, ping, etc is fine. If there are any problems, I will send you another chip.

Thank you Mattw_83. thank you for asking datsfreak. Sure I do send generic tuned ecu. What I usually do is, Firstly I will ask you for a deposit. ($450 for ecu and $200 for deposit) Then I'll send you the spare tuned ecu that i have. After making sure you are happy with the tuning, i will ask you to send me your untuned ecu and i will send you back the $200 deposit. I did samething for robmbt.(and other many custermer) http://www.skylinesaustralia.com/forums/Re....html&st=80

Thanks for yesterday Mattw_83 Feel free to contact me anytime if you have any problems.

I sent PM.

I sent PM.

Im sorry. I can not remap M35.

I sent PM. Thank you

I sent PM.

Daughterboard and NISTUNE board is same performance.(Daughterboard need emulator and NISTUNE board do not need) Also Im using both NISTUNE softwear. If you do not know eprom emulator please search it.

I think NISTUNE board around $300 and daughterboard$150. Remap labour is same.

R34 ecu need daughterboard install for remap. Daughterboard need x2 emulator and NISTUNE board do not need emulator for remap. Daughterboard much cheaper than NISTUNE board. Yes I can R34 NISTUNE.(NISTUNE and remap is same)

Put in gear. Accelerator on and off.(1500rpm on , 4500rpm off) If solenoid will not make noise (click nois) its not working VCT. Im mechanic (I have 23 years experience). Im in north ryde. and I have software for nission consult.

181kw is too low. I think VTC problem. Normaly over 190kw with FMIC.(some cars over 210kw) Please come to me. Check for fee.

Please tell me is your AFR meter widband? Please come to me I will check your car.

Thank you Tangle. I am able to remap Z32 AFR and bigger turbo. But I can not remap over 400hp S1 stagea.(because S1 can not realtime remap) If e-manage ultimate is able to handle over 400hp I think its worth.

Im wrong. Boost senser is not in AFM. its separete. Please tell me how to wire in e-manage? Boost senser wire cut and one wrie conect to input side and another wire conect to output side?And adjust volt. Is this correct? Can not remove boost limiter over the e-manage software? Serise 1 stagea can not real time remap tune. I think emanage ultimate is very good option. How much is emanage ultimate , wire , install and tune totale?

serise 1 do not have boost limitter but serise 2 have boost limiter (limiter start from 14psi). Sensor is in AFM.(same ER34) piggyback is can not remove limiter.(inclued e-manage) Its need HKS FCD. Remap is able to remove limiter but tuner have to find address in ecu data. Also NISTUNE can not remove boost limiter now. I think he does not know serise 2 stagea and R34 have boost limiter. Im using NISTUNE software and this is very good software for remap ecu. NISTUNE is able to tune daughter board for R33, R34, serise 2 stagea,S13, S14,S15 etc. (Im using daughter board. This is cheaper than NISTUNE board. only $150 for R34, serise 2 stagea.But tuner need 2 emulator.Its same silvias. If some one want to daughter board I have instock in Sydney.) NISTUNE is not inclued tune data. (power fc is alrady installed tune data.so any tuner is able to tune) So NISTUNE is have to make tune data (tune map) tuner self. (I think fuel and ignition good tune map can not make only 2-3 hours dyno) This is some shop NISTUNE R34 (same stagea) dyno sheet. Looks like did not change ignition timing map. I think adjusted only AFR. He paid $850 for this tune.(This shop is his local tuner) Many shop is using NISTUNE but how many shop is able to good tune for R33,R34,stagea. If someone want to DIY tune by NISTUNE I think he need base tune data.

Who told you Im planing to install "generic" maps pre burnt on chips???? Price inclued modified ecu , chip and tune labour . How much is PFC and tune labour?

Please tell me what is your remap problem? Are you installed daughter board?

Thank you DrewII robmbt (he is in WA) got 200kw and his car is auto. If his car is manual I think over 200kw easy. http://www.skylinesaustralia.com/forums/Re...toshi&st=80

S1 anybody can not real time tune inclued nistune.( R33 daughter board can not fit to satagea ecu). I am able to remap stagea but its not real time tune. Remap data will burn to chip and go to drive or dyno. If its ping,fuel lean or rich I will remap again. (Im remaping R33 ecu so I have a lot of data.) cost from $650 Do not need piggybag ecu. S2 is able to real time tune.cost from $600 include daughter board , modified ecu and road tune ( check AFM volt , injector, AFR etc)

$500 include chip , modified ecu and real time ecu tune labor on the road. Road tune take around 4 hours. Is this expencive?