mickr32gtr

on 1.5 bar boost u should be getting about 270awkw i reckon

Stacey looking at the dyno chart, the horizontal is speed. The left vertical is kw and the right vertical axis is in "N". If u read the chart the top curve "power", it climbs from 50kw at 80kph to 160kw at 130kph, the gets a little less steeper but keeps climbing to a peak of 208awkw at 180 kph. I have no idea what rpm this was and i think the readings were taken in 4th gear which would make it about 4500 - 5000 rpm from experience (ive had it at 211 kph at 6500 rpm before). If the std r32 gtr has peak torque at 4400 rpm mine (with the PFC) has peak torque about 5500 then. Does that sound right to you?

Probably a stupid question. Ive got an r32 GTR and plan to take it down the 1/4 mile soon. To get the best time and assuming all other things being equal, should i be shifting at the point of max torque (4400 rpm) or max power (8000 rpm)? Got a PFC and AVCR installed and A/F ratios perfect through the entire rev range. Cheers

The standard wheel is 16 x 8. I think the widest tyre u can fit on the rim is 225 wide. Thats what im running. Hope that helps.

Thanks dude. that clears it up

by the way i blew the f***** sti away. I think 4.7sec for the 100 kph can be reached if the car only had like 10,000 km on it and not much wear.

my r32 GTR has a power fc and avcr with 1 bar. launched it at 5000 one night at 10 degrees ambient racing my mates sti and the best i could do was about 5.2 sec timed by the same meter. Im guessing u need to launch at like 6000 or something to prevent the thing being bogged and dropping revs/boost. Mind you, after a launch at 5000 the clutch smells like Chernobyl.

Can someone tell me what type of lifters the rb26dett uses? hydraulic or solid? whats the difference? Cheers

Mike, is there any way to get the load-point numbers without the Commander Unit? I dont have one. Ive been thinking about buying one for a while.

Thanks Mike. I did get the PFC dyno tuned, got the fuel maps leaned out. It all took about 15 mins and i was surprised how short it was. The guy used the Apexi Commander unit and im told he has done it 1000 times before so he was an expert. It was C & V here in NSW that did it. When i got the PFC installed i only had the full exhaust fitted and on std boost it gave me 180 awkw. After the AVCR was fitted and retuned for the higher loads, its pumped 210 awkw. Im not sure what to do next, whether to see another tuner and have the fuel & ignition maps checked or whatever. The car does feel off under 3500 and its unbelievable on boost and i would be happy if it felt alive all the way thru the rev range. I got the impression that i was being taken for a ride, so to speak, when the car goes into a tuner and i dont want to get ripped off.

i have a black r32 GTR 1993 model. comes with Apexi PFC Apexi AVCR Full Hi Tech 3 inch exhaust from the front pipes HKS filters new stereo + speakers 73000 kms Dyno tuned makes 210 awkw. Massive torque new timing belt, engine carbon cleaned, injectors cleaned, always garaged + serviced. Looking for about $35,000.00 for it.

Got an r32 GTR with these mods: PFC AVCR @ 1 bar boost HKS filters 3 inch exhaust from front pipe Standard turbos, dynoed etc making 210 awkw. I noticed that after the PFC was installed that when im in 3rd @ about 3000 rpm on a mild load the engine misses for a fraction of a second. It doesnt do it all the time, maybe once every 5 occasions im at that rpm and load point. Has anyone had anything similar? Any ideas on fault and repair necessary? Cheers.

i got a Power FC, AVCR, full 3 inch exhaust and pulled 210 at all 4 wheels at C & V Performance.

i thought the figure was about 140 awkw standard. My r32 GTR started with about that figure then i added a power FC and full 3inch exhaust and got it tuned, gave me 180 awkw then i fit an AVCR, HKS filters and screwed it to 1bar boost and it gave me 210 awkw. I also read that GTR's pull 140 awkw in standard form in an issue of Hi Performance Imports.

I'd love to install N1 turbos but where do you find them?