David Bassett

The GTR is a 6 bolt(6X1)and the S15 is 6 bolt (3x2), which I know. I don't want to bolt the GTR axles to the SI5 half shaft, I want to remove the half shafts or stub axles(or what ever they are called) from the R32 GTR and put them in the S15 diff. I have the S15 diff in the shed and the GTR diff in the car which I don't want to remove the diff until I know what will fit and what modifications I need to do. I know the coupling for the tailshaft is different on both diffs, but that can be modified easily. I have been trying to find some pictures of the R32 GTR half shafts on the internet but have been unsuccessful. So anyone has pictures of the these half shafts could you please post them in this thread for me. Thanks David

Hi, Could anyone be tell me if the halfshafts from a R32 GTR diff will fit into a manual S15 diff(hellical gear type). I want to install the S15 diff into the GTR cradle and be able to bolt the GTR drive shafts to S15 half shafts. Thank You David

Could anyone tell me the number of splines on a R32 GTR rear drive shaft. Thanks David

Anyone know if there are any pinion gear sets available to give me a higher diff ratio for a R32 GTR diff. I was looking for somewhere between 3.5 /1 to 3.7/ 1. David