rx-[7]

yes it is bush bearing, just ment there isnt any more then a brand new turbo

Yes it is

I have a Power FC and hand controller to suit R32 and R33 GTR. Located in Kellyville Sydney The Power FC was tuned by Ben at Unique Auto Sports and produced 230 kw at the rear wheels on Premium Unleaded at a very safe tune with solid A/F ratios. And i have the Dyno sheet to prove it. The car ran 14psi boost (boost restrictor cut out) and only mods were a 3inch cat back exhaust and pod filters. UAS charges $590 power fc tune, which includes "part throttle, cold start and final road tune using Pro Tuner, knock sensor and Bosch Air Fuel Ratio meter and includes setting boost or multiple boost settings" UAS DYNO PRICEING So if you have similar mods this is PERFECT FOR YOU, and can save you $590 Which is about 45% of the total cost of buy and tuning I also fitted the backing plate from a stock ECU to the Power FC so you can actually bolt it in the stock location, normally they just float around in the kick pannel sometimes getting damaged. But dont worry it still has the power fc front cover to show it off. I want $1000 firm. I know some people can get them brand new for about the same money, but if you dont get a brand new one tuned you can blow your motor (and loose power and responce) So your saving about 45% Which is a bloody good discount for an item which is BETTER then new almost every way!!!!! PLEASE read these and it might make you think twice about buying a new one and driving around without getting it tuned... it could cost you a rebuild. About UAS quality of tune before and after with a PFC http://www.skylinesaustralia.com/forums/in...=110666&hl= This is about dirving around and standard PFC tune http://www.skylinesaustralia.com/forums/in...=118777&hl= This one is all about the PFC and all is functions, and about driving around without getting a tune http://members.dodo.com.au/paul/docs/power...erfc-faq.htm#24 Call Jake 0404080448 or pm or email [email protected]

I have a turbo kit for sale off an (GTR)RB26 used for under 1000km It contains the following: HKS TA45 in NEW condition NO PLAY AT ALL HKS Cast manifold (getting chrome HBC coated ATM) HKS 50mm external gate HKS alloy inlet pipe for 2 afm's HKS alloy pipe replaces the alloy pipe with "twinturbo" on it and says HKS POWER Joins the turbo to stock intercooler piping (Gives a factory fit and finish) 2 Stainless Heat sheilds for manifold and turbo will be also included just having them laser cut at the moment Everything you need except oil feed and dump pipe. Kit is rated at 650 HP full boost at 4500-4800 on stock internal motor with exhaust and air filter Perfect kit for a mild but tough street GTR Item is located in Kellyville Sydney Price $2400 Lots more pics just look in my gallery

I have a Tomei 1.2mm Super Grommet Metal Headgasket for RB26dett brand new sealed in plastic Perfect for lowing the compression just a little (stock is 1mm) so you can safely run higher boost without sacrificing off boost drivability. Reduces the chance of your motor pinging and blowing up!! *stronger *Improves Sealing *Able to withstand higher cylinder pressure *Greater ability to withstand detonation (pinging) Located in Kellyville Sydney but will post Australia wide Bought from HERE - Hi Octane Racing for $454 Sell for $250 Small price to pay for alot of insurance against blowing your motor Ph 0404080448 Jake

NEW PRICE $500

Price drop $1700

i was wondering how these go for drivabilitly? especially at low rpm as i have heard "fatz" sold his pfc djetro as it requires a single throttle body conversion? does any one have one with 6 throttle and no probs?

im interested in the gear box if ya split it up

pics to [email protected] thanks

i'll take the push to pull converter (OS Clutch Release Movement Alteration Kit).

AS NEW Exedy Tripple plate clutch and fly wheel (PUSH TYPE) to suit R32 Gtst & Gtr (till Aug 93) and R33 Gtst Was installed 3 days before my mate wrote off his car, i bought it off him to use with my rb26/30 in my 32 Gtr but found someone put a late model box (PULL TYPE) in my car.. serves me right for not checking. This clutch cost my mate over $3000 and because it was brand new and my mate just smashed his car un-insured i paid close to that.... my loss your gain Price $1700 Located in sydney will send at your cost (as its bloody heavy) HERE at modyourcar.com they are $3699!!!!! thats $2000 discount is virtually new!! Will send pic if you are interested any questions call jake 0410496449

AS NEW Exedy Tripple plate clutch and fly wheel (PUSH TYPE) to suit R32 Gtst & Gtr (till Aug 93) and R33 Gtst Was installed 3 days before my mate wrote off his car, i bought it off him to use with my rb26/30 in my 32 Gtr but found someone put a late model box (PULL TYPE) in my car.. serves me right for not checking. This clutch cost my mate over $3000 and because it was brand new and my mate just smashed his car un-insured i paid close to that.... my loss your gain Price $1750 Located in sydney will send at your cost (as its bloody heavy) Will send pic if you are interested any questions call jake 0410496449

where is stuff located

bump

New Price $550 - This is a quality manifold