Jump to content
SAU Community

Landyy

Members
 View Profile  See their activity

  • Posts

    77

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Landyy

  1. Landyy
    wow crazy how time flew by and life got busy.Qualified in my field of work, travelled the world ( including jdm land) & matured up etc. I was just 19 when i bought my 33, reading back i can see how excited i was! now 28 still excited but rational! kept the 33 till 2020,plenty of events attended and i enjoyed that car, met and made alot of friends, been to world time attack, gtr festival,racewars,tokyo autosalon, snowy mountains 1,000 & plenty of other events. Bought a 32 gtr back in 2016 that car ended up making 600whp on e85 did powercruise and was a solid street car, ultmately threw a rod (typical rb26 stuff). Sold the 33 to finish off my 32 gtr build, Nitto 3.2 stoker kit cnc ported head, samsonas rs90, precision 7675, emtron ecu,mechanical fuel pump aiming for 1200+8sec. Gtr build isnt far off being done. Cant thank everyone enough for the replies, the little knowledge helped me alot to venture into other things. Now i can pull out an engine, pull it apart and put it all back into a car etc. I'll do a final post for the R33 with photos before i sold it. If you would like to follow the gtr build its on insta under 90s_hero_32. The car scene has changed alot, everyone is car enthusiast apparently & you must respect them even with a junk build filled replicas, china spooly boy. SAU keeps the egos down compared to other socials.
  2. Landyy
    http://m.youtube.com/watch?v=YUSIkU3GQ9Q here is a walk around while on rotational idle:)
  3. Landyy
    Thanks man. Swapping over from copy plenum to genuine greddy, rotors, new tyres & maybe some suspension work n that should it for a while. Save up for house
  4. Landyy
  5. Landyy
    Car is finally done here is a link for dyno. It made 415rwhp @18psi Tuned by ovaboost. Full boost @4800rpm pulls very hard. Here is link. http://m.youtube.com/watch?v=jriwTGLE1Co
  6. Landyy
    Good thread.recently I got a gt3040 with 1.06 rear tune in 3 weeks so I'll update you guys
  7. Landyy
    Bump 1400 this week! Tell your friends
  8. Landyy
    Perth WA.My car is going in for a tune and I need the extra cash in case anything goes wrong.
  9. Landyy
    http://www.autosport.com.au/itemdetailspage/15901 This one has the .91 rear Thats the specs on the link. If I don't sell it I'll end up keeping it and one day ill probably use it on a gtr if I get one
  10. Landyy
    Its just a garret.im sure hks buys these turbos off garret and just modify it a little.
  11. Landyy
    The title says garrett. Its a kai bb. What other specs do you need? Look up garret gt51r Or search up the part number.
  12. Landyy
    The turbo has been ceramic coated & yes I have a intake pipe. That was just for photos
  13. Landyy
    Genuine Garrett t51r KAI-BB.This is rated 1000hp and would suit a built motor, rb26, rb25, evos or rx7's or anything.No shaft play or bull shit, you'll get what you see on pictures.In good condition, used for 3000k(made 540hp on a v8 14psi) gear box shat itself & was in storage for a while.Its worth more than the asking price.serious buyers only and feel free to contact me for any info, Will come with brand new metal gaskets. 1500 or make an offer. 0478659723 I'll post but buyer will have to pay for postage. Will post to Australia only! !
  14. Landyy
    Yes and it has alot of features too, boost can be controlled by the ecu using a mac, launch control & no need for afm . Engine bay looks really mint. One thing I've learnt Is that buy parts that you're going to use 110% well most things always don't go your way:/. Here are photos. I went with blue. Tuner will do welding & other fabrication needed.
  15. Landyy
    Well the set up is complete booked for 5/12/14 Mick at Ovaboost will be tuning the car.Have gone with totally different parts from what I originally planned.Sold most things i had.As of now these are the mods -gt3082 1.06 rear -high mount steam mani -50mm pro gate -750cc bosch injectors -Aftermarket front facing plenum -bosch fpr -Splitfires -bigger throttle -Haltech platinum pro -pro flow fittings all around -plus more I'll post up photo of engine bay when im on comp.im expecting big power and the haltech is able to do alot of great things
  16. Landyy
    Good news the bolt is off. My brother had the same setup as me with one of the hybrid manifolds, the manifold cracked the night before the tune(tiny run)still took the car in for a tune and tuner couldn't get tuned as it spiked so much at 5,000rpm(38mm ultra gate).Soluton was get a bigger wastegate and with w as wastgate pipe.So I'll be going top mount instead. Hybrid is a f**k around and the seller kept arguing when we messaged him about the manifold. DON'T EVER BUY A HYRBID MANIFOLD. THE WELDS ARE SHYT AS. OH WELL I LEARNED.
  17. Landyy
    Yes it is . I'll have to wait & see what I can do or can't do.Last option is get a new head & maybe get cams along the way.
  18. Landyy
    Oil gallery**
  19. Landyy
    Worst of the worst has happened to me. 2/12 studs snapped, managed to get one out using drill & easy out.The second was pure bad luck, the stud snapped & once drilled, inserted the easy out, the easy out snapped into the snapped stud.My brother went to drill it out and since the easy out is a hardened he pushed too hard & drilled into the head(5mm-10mm).Worst nightmare. car is sitting in the garage untouched since Saturday. I believe he has drilled into the oil barrel. My question is amI f**ked & will need a new head,will that affect my tune/car in the future or would the new studs block off the hole?.The drill bit was 3.5mm I believe. Smelled of oil n thats all I could see when we took out the drill bit. Any input will be helpful especially someone who has done this before. I've done heaps on my car from coilivers to clutch with my brother & everything between, by far this is the biggest f*k up haha.I'm depressed now lol.thanks in advance.
  20. Landyy
    Thanks & yeah I'll upload a good vid once done. Cody who tuned your car & angryrb guy,how much power did your brother make?
  21. Landyy
    THE SEARCH FOR HP-Silver bullet slow start. It's been a while since I've updated this..but the search for power never stopped.Car is almost done & I'm hoping she can push out close or pass 300kw.The body looks the same,only changes are a new set of rims as I got over running copy rims (rotas).Enkei rpf1 18x9.5 + 15 all round wrapped in star fire RSR(excellent all round tyres tbh & i would recommand them to anyone).I've gone with a low mount set up with external gate & the turbo is the latest hyper gear with a op6 rear housing.Top mount here is a 100% yellow sticker so kinda playing safe & not wanting to get done by the donut eaters.This is just the mods I've got & I'll post actual vid n dyno results once car is done. -Greddy Ebc -Hyper gear turbo -Utra gate -Steam pipe mani -Os giken single plate clutch -660cc jecs -Z32 -255(might upgrade) -Greddy fpr -Split fire coils 3" to a hks dragger exhaust(bigasf) & a nistune.Thinking of getting rid of it & getting a PFC though.Few things I'll do such as brake upgrade,2way dif & anti roll bars along the way I've learnt to do all work by myself with the help of my brother so yeah it takes time,but we'll get there..
  22. Landyy
    365 is reasonable.I ended up buying a hyperg turbo,the newest one they've got . My car is apart & hoping everything goes back in by the end of the month.Since im doing all work at home its taking a bit of time.Ive also got a Utra gate 38mm so I'm hoping I make close to 300kw as promised by stao haha.I thought about poncams (256)but wasn't sure as a lot of people are saying you make f*k all power
  23. Landyy
    thanks dude & I'll order some very soon. here is a link to a video of what the car sounds like https://www.youtube.com/watch?v=VYEtvAdrHBk&feature=youtube_gdata
  24. Landyy
    Time for a update. Intercooler was installed & car is currently running 11 psi. Since last time,car has now Tein edfc coilovers & i changed to rota fighters(specs 18x9.5 +20 offset) i like these rims as they make the car look really mint.. Car now has front and rear strut brace & hicas removed. i decided to sticker bomb my fuel cap and added a few stickers.(not over kill or random ones). *Car now has Led tail lights,i like the look and i'll keep them.All lights have been replaced n got Hid's. here is the link for the Hid's,very easy to install and i would recommend them for anyone chasing some. http://www.ebay.com.au/itm/35W-AC-H1-HID-XENON-Kit-Nissan-Skyline-R32-R33-R34-S14a-S15-200sx-6000k-8000k-/161051422456?pt=AU_Car_Parts_Accessories&hash=item257f69aef8&_uhb=1 Future mods -2 weeks time from now Os Giken single plate clutch + flywheel and 2way diff going in things to be done. -Private plates(ECR33,MYY33,JDM33,SW33TRB) Do give me some ideas for plates or wat you reckon sounds good! -Ordering a highflowed turbo or might change my mind go top mount. -660 jecs injectors -ECU(nistune or power fc) -3" intake pipe -whiteline anti roll bar for both front and rear. -Camber kit(maybe) -aftermarket bucket seats. -nismo clear indicators -toyo r88.tyre i have on atm are achilles atr sport they are ok,but once i get more power i'll change them might have missed some things. Here are some pictures of what the car looks like atm. enjoy and please do comment
  25. Landyy
    yeah none the less still looks good I want coilovers! so the power fc will have to wait.
×
×
  • Create New...