juicy3

How much boost are you running and on what turbo? Also how long has it been running for? They're around $80 for the monotorqe so it's below my budget which is always a good thing

Where did you buy yours from? The gasket I got was only $50 so not sure how the quality is.

Hey, Sorry guys, looking for 300rwkw or just under with around 15-18 psi, on e85, just wondering the tolerance of the rb30 head gaskets bare in mind the one I have isn't a genuine Nissan, it's an autobarn replacement

Hey guys, Just wanted to know if people were using rb30 head gaskets and if they can handle boost very well, If thats no the best idea, where do you guys get your rb25det head gaskets from? Reason i ask is because i've got a spare rb30e head gasket spare which i got from autobarn a while

Hey Stao, in regards to the r33 ss2.5 high flow, would this intake pipe be good enough to run 300 - 340 rwkws. They are sold be performancewise on here, or if anyone has experience with them? CAPP53- ALLOY INTAKE PIPE - R33 GTST STAGEA

Hey guys, Which timing belt is used when not re-locating the tensioner? i've read that people are using 150 tooth belts but i've been looking into the 152 tooth belts Also is it a must to replace the idler and tensioner?

Hey guys, Just wondering what your opinions are on running in an engine, found this in the rb30 section and seems like a long shot as appose to the "easy break-in" Kind of came across like one of those get a 6 pack quick ads you always see hahaha http://www.mototuneusa.com/break_in_secrets.htm

http://home.pacific.net.au/~geoffwill/RB%20oil%20gallery%20mods.pdf << Just found it haha

http://www.mototuneusa.com/break_in_secrets.htm Anyone ever done this ^ Im going to be running one in soon the old 1000ks softly way but that kinda looks to me like i better have a spare 30 block just incase haha

In the RB30 DOHC guide is says if you have an rb25 head to use two 1mm restrictors and if you are using an rb26 head you use 1x 1.5 mm restrictor, i think i read sydney kidd wrote somewhere that you can just block off one but dont quote me on that. Anyone know where you can get the restrictors from?

Hey guys, just wanted to know if anyone knows where i could get my rb30 balanced? Also does anyone know anywhere in adelaide or aus that high flows or sells high flowed r33 fuel injectors?

Yeah i probably should have mentioned that the reason i did the test was because the dipstick was popping out, haha so piston or seals? Guessing this mean rebuild or new engine -.- or rb25/30 conversion haha Anymore thoughts guys?

Hey Guys, Did a compression test today on my r33 and was Pretty happy until the 6th piston (closest to driver) Here were the results 1 - 150 2 - 152 3 - 156 4 - 155 5 - 150 and then ( 6 - 90 put about 5 - 10ml of oil in there and it only went up to about 93 ( Not too happy with that Could anyone shed some like on what might be wrong and ways to go about fixing it?? I do have a video of the tests if they are relevant to anyone? Thanks Guys Josh

Thanks heaps for the replies guys! What about the Intake plenum, any ideas on which ones are safe and which ones are a no go?

Hey guys, new to posting on the whole sau forum, just wanted to know if anyone has had any experience with clean injection on ebay http://myworld.ebay.com.au/clean-injection?_trksid=p2047675.l2559 was looking at some of the deals they have with the rail, injectors and the fpr. Couldn't find much with the search button and seen so many people get flamed for not using it haha Also i was looking at getting one of the "freddy" plenums to go with it, just want to know if this will bolt onto the"freddy" and last haha there is so many freddys on ebay, just want to know if there is a specific ebay store or online store that sells one that hopefully wont leak etc I also know that alot of people will say stay with the stock plenum and just get side feed etc but i want to clean up the piping (front facing) and in the process if these injectors are go to go then why not grab a this to go with it http://www.ebay.com.au/itm/Nissan-Skyline-RB25DET-rb25-gts-t-gts-s-r34-r33-rail-1000cc-turbo-Fuel-Injectors-/181071313809?pt=AU_Car_Parts_Accessories&hash=item2a28b0fb91 Once again sorry if this has been covered and if someone could like me that would be great! Thanks guys! Josh