Jump to content
SAU Community

Sammy

Members
  • Posts

    168
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Sammy

  1. any loom / plug / wiring to go with the microtech? series 1 or series 2 RB25?
  2. Hey guys, I'm after any trust/greddy turbos that (preferably) have screwed seals, bearings shot, etc Let me know what you have, either here or by PM, don't care what size, from TD05's up to T88's Thanks Sammy
  3. What comes with the wideband 02 gear? Does it still need a wideband sensor or what? Ta
  4. I think it is a t28 flange
  5. PRICE DROP!!! Now accepting offers of 1100 - shoot me a PM if interested!!!!!
  6. hey guys i am at the stage where i need to sort some sort of management for my RB20 silvia. Now i have been doing a bit of reading around the web, trying to see how the Emanage has worked on cars similar to mine as not many people seem to run them here. However with Greddy recently launching the Greddy E-Manage Ultimate - it is now a high contender on my mind. So my question is: why would you use a power fc/microtech over a GreddyE-manage if it can do ignition, fuel maps, air flow meter changes etc with the emanage? if anyone has had experience with them, pls post up!!!!! thanks sammy
  7. forgot to add, the price is 1200 .. or make me an offer i cant refuse
  8. Hey guys, I have a !NEAR NEW! Garrett GT28RS, 0.64 rear housing (smaller of the two options). Includes actuator. An excellent option for SR's/CA's looking for 200-240rwkw with piss-all lag There is NO shaft play, NO blade damage, NOTHING that wouldnt be expected of a turbo this new Come see for yourself This is going on ebay in the next few days if it isn't sold. Love ya's long time Payment: $1200 ONO Location: Milton, Brisbane Contact: PM or email ([email protected])
  9. BOOST GAUGE SOLD!!!!!!! come on guys i gotta get rid of these!!!
  10. BUMP!!! COme on guys i need this stuff gone!!!!
  11. Item: GFB Blow Off Valve Kit $100 - includes valve body - adjustable blow off setting - Plugs - Black Vacuum Line Autometer 2inch Boost Gauge with 2 Custom made carbon fibre gauge holders $100 -2" Mechanical gauge includes 6ft Nylon Tubing, Fittings and Installation Kit Turbosmart Xs Manual Boost Controller $35 Location: West Side, Brisbane Item Condition: As new never been used. Reason for Selling: came with car but i dont need them Price and Payment Conditions: CASH! Pictures: Contact Details: PM or call me/sms me on 0403 756 879
  12. Ok guys well i did a compression test today ..... i have a blown engine 13JDM will be out of action for abit
  13. ok guys well the update on the sitution is unfortunitly not good - she is STILL not working Today we did: * tried a different AFM * new spark plugs * cleaned AAC valve * checked all vacuum lining * Adjusted CAS with hand to see if that did anything as suggested but didnt make any difference. * sprayed all connections with contact /electrical cleaner We can gather that the engine is getting more than enough fuel as the spark plugs get flooded with fuel not long after putting them in Sparkies are still sparking and the car is still cranking but NOT starting. So basically guys i mean we dont think the engine has popped but it is definitly getting fuel, spark and air so i dont know where to go now would getting a new CAS be on the cards??? Any pointers would be really helpful guys its much appreciated!!!!!!!!!!!!!!!!!!!!!!!!! thanks so far for all ur comments - KEEP EM FLOWING!!!! Sammy
  14. hey everyone i have a problem with my engine again (RB20DET silvia) as some of you know i took it out to the track day at qr last week car was fine until the end when i lost power. I thought it was intercooler piping but got back to the pits and found out it wasnt Eventually got her home but with a lot of effort It was very boggy in low revs and then a little less boggy in higher revs. Got it home and now it wont start, it is cranking but not starting we have tried: battery voltage is fine, brand new spark plugs coils are fine (coil leads are sparking spark plugs) above point rules out wiring and ignitor plenty of fuel in the tank taken the exhaust off before the cat to make sure it hadnt clogged clutch-starting doesnt work fuel pump makes it usual whine on start-up injectors seem to be fine, fairly decent smell of petrol in the engine bay vaccum lines all checked. fuel lines are fine. fuel filter is fine. so what else does this leave me with? crank-angle sensor? anything else? your help would be very appreciated
  15. Hey there - Can someone help me?? I need: Wanted: 17 inch Drift teks 4x114.3 for a S13 Silvia! Item Condition: decent Price and price conditions: Open to offers Extra Info: Would be great if they came with tyres with tread Contact Details: PM or leave comment Location: Brisbane, 4074 Delivery & Conditions of Delivery: Pickup is my preference however if need be post can be arranged Cheers ---Sammy---
  16. * she lol we have bought some coils and tried them, however is it possible that red top and silver top coils are different??? cause despite the fact that we bought 'rb20' coils - they are not exactly the same as the ones in the car.
  17. Hey there I have a Silvia with an rb20det in it Currently one of my coils - second from the back is overheating/melting and is NOT sparking either. ---It sounds like a WRX----- What would be wrong? We have tried a range of new rb20 coils and checked the spark plug and all are fine any help would be appriciated! cheers sammy
×
×
  • Create New...