sky30

bump

Id say definately look at your exhaust manifold, from that last pic it looks like all 6 cylinders merge into a hole about 50mm in diameter. You need a propper collector.

After a RB25det oil pump in good condition, PM me. Cheers

Joel, have you tried Federal ss595 yet?? , i had toyos, and found federalsgave better traction, for less money.

Im after a R32 power steer pump brakcet that holds the pump to the block, must be from R32 with HICAS 4 wheel steer type pump. PM me. Cheers

After a Stock RB26 harmonic ballancer. PM me. Cheers

Bump

So there is no difference?? Anyone else confirm?

After some advice on the difference between R32 And R33 GTR turbos, are these the same wheels/ housings, or do they have some differences? Cheers

Im after a set (pair) of Stock GTR turbos in good working order. May consider a cheap pair of Hiflows also. PM me. Cheers

I wont be able to make it anymore...

Pedal definately goes spongy and nearly to the floor when thngs heat up.

Yeah i completely drained the old fluid before adding new stuff. Peadal feels good and brakes seem to be good when cold, its only when i brake continuosly/ excessive that they have the problem. Looks like i will try better fluid. Anyone had any trouble with the std ABS unit? Are people with factory ABS still using it, or have removed it?

How much do braid lines help?

Seems to be a few people using QFM pads on here that rate them well, anyone else had bad experience with them? Black32:- Yeah the pedal get a soft spongy feel, do you know what joel replaced?

Pads are 500 or 550 celcius temp rating, they are meant to be a performance pad similar or better than Ultimates. Is 500 degrees high enough temp range? Anyone else got suggestions?

Im having a pretty bad brake issue, I have a R32 GTS-4 with ABS, i have just put in new QFM K500 pads and fresh dot 4 fluid. The brakes work fine when driving on the highway and jump on them, they pull up good, but when i go through the hills after about 5minutes of cornering/ braking the brakes dont work real good and pedal will push in alot further. After i drive them on the highway again for a while they return to normal. Can anyone suggest what my problem could be and what i need to fix? Is it anything to do with the ABS Unit? Cheers

Joel, Did Antony end up selling his Black R32 with the RB30 in it??

The description Sounds just like my old car, but i sold it with just an RB20det. Am-performance sold his R32 GTS4 with RB30det awhile back i think, Cubes should be able to confirm??

Price drop.

Made it myself, it does take alot of hours to get it all in the right spot. few pics attachment=129061:RB30det_build_044.jpg]

I am using a custom low mount manifold with a garret 35/40 and 48mm external wastegate, it has clearance everywhere, but it is a bit of a tight squeeze. I preffer the low mount for lower engine bay heat temps as the hot air can escape out the bottom of the car. All factory turbo setups are low mount, there is a good reason for this.....

What make you say this, are you talking from expereince??

1. Put a RB30det in it, then 2. Sit back and wonder why you were even going to spend money on the RB20......

Hey Shaun, hows things? Car sounds just a little different now......