Jump to content
SAU Community

SkudR33

Members
 View Profile  See their activity

  • Posts

    534

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by SkudR33

  1. SkudR33
    I personally wouldn't recommend degreaser as it leaves an oily residue behind which needs to be washed off...
  2. SkudR33
    Definitely the iac! Scrap the mechanic and attempt to clean it yourself, a quick way to test this theory - spray some carby cleaner into one of the hoses attached to the iac and see if it temporarily fixes your issue.
  3. SkudR33
    Correct me if I'm wrong guys.... Red = positive! black = ground and green = boost signal. I'd get 12v power to both ground both blacks, then connect the green from solenoid to the green on the gauge.
  4. SkudR33
    Just realised it's virtually impossible to read that diagram so I'm reuploading the original quality version.
  5. SkudR33
    This is a nice little diagram to help you plug your engine harness back in, however it doesn't show plug colours, etc.
  6. SkudR33
    Hey bud would you sell the loom on its own?
  7. SkudR33
    Hey bud would you sell the hand controller separately?
  8. SkudR33
    Deatschwerks offers a wide range of Bosch EV14 top feed injectors with a height of 40mm!
  9. SkudR33
    Location?
  10. SkudR33
    Goto to the last few posts on the thread I linked below. I wrote up a small guideline to check injectors because that turned out to be my issue. http://www.skylinesaustralia.com/forums/index.php?/topic/438150-Cylinder-%231-Dropping-Completely
  11. SkudR33
    I'm 26 and I had my r33 gtst insured at an agreed value of $11,000 and I was paying $1200 a year with $800 excess. My insurer was just car. You gotta call over the phone and speak like an innocent and mature guy to get good deals with these f**kers.
  12. SkudR33
    Also check your earth wiring, specially the one from the motor to the chassis
  13. SkudR33
    I once had this major problem with a misfire. I had installed brand new injectors a month earlier, they turned out to be faulty. You can't rule out brand new parts
  14. SkudR33
    Have you checked ignition, fuel and air to make sure there is no issues? If you want a walk through guide of what you need to do, I'll be more than happy to spend 10 minutes writing up a little guide. But I think you might be able to find some threads relating to similar issues.
  15. SkudR33
    Quick fix is to raise your idle a bit. I'm sure somebody else has experienced this...
  16. SkudR33
    Hey bud I'm after an engine loom that's in good condition... Where you located and what price you looking to sell the loom at?
  17. SkudR33
    Good work! Best news I've heard in a while...
  18. SkudR33
    Just means your running rich on high boost. Safer than running lean!
  19. SkudR33
    Congrats
  20. SkudR33
    Have you tried gum tree - I found it's easier to sell small items on gumtree
  21. SkudR33
    Hey guys' Started pulling apart an rb30 for my rebuild today only to find that it's got a huge hole in the wall of the block behind the ac compressor Does anybody have a rb30 block in western Sydney they want to get rid of... Please message me on 0434242667. Cheers!
  22. SkudR33
    I'm selling my whole rail - I'll give it to you for $50
  23. SkudR33
    I'm interested in ecu - can you let me know if you decide to sell it gain
  24. SkudR33
    There is one company that makes it and it costs $69... Link below http://www.efihardware.com/image/2358/regulator-and-adapter-alloy-fuel-rail-end-8-o-ring-port-to-Nissan-regulator_2358
  25. SkudR33
    No point in spending big bucks to rebuild rb25 back to standard - don't waste your money... Either throw in a rb30 bottom end or just get a second hand motor and throw it in your car.
×
×
  • Create New...