donburtron

Unless you have a 1000hp car or had you dont know what you on about.. http://www.nzefi.com/packages/power-upgrade/nissan-skyline-r33-rb25det/ That link will give you some detail but go ahead and contact them and you will see you wont need that much money to do it.. With a good mechanic and cheap parts supplier that i have you can do it in half the money.. iv already got a rebuilt box and diff aswell that i havn mentioned so if you just want to press buttons on the keyboard you might aswell get off this forum and keep studying year 10 though out your school holidays.. and maybe some spelling lessons

I have already done the following mods forged bottom end with billet crank Tomei type L fpr bosch 023 Z32 afm 1000cc injectors splitfire coils fmic greedy plenum and 92mm throttle body exhaust hd clutch with gtr racing flywheel haltec ecu other random stuff boost controller turbo timer etc im yet to do the head and cam woek with studs and the new turbo im buying asap.. i will have the current engine for sale soon it is making 366rwkw at 25 psi.. pm me for details. thanks for your advice scotty. i am useing the car as a daily drag and track.. i also want the numbers as im more than half way there with all the parts i have wanting to build a engine.. so basicallyif i went with a larger rear housing i will have some lag at lower rpm.. its my daily aswell so i dont want to be boosting under 3000 to much anyway but i dont want it to be laggy if i put my foot down i want response aswell.. Would you recommend any size housing or put me onto a post that has b3en over this before ? if any one else has some advide if would be good.. once again thanks for your help scotty

Hi i have a r33 gtst and just bought a 4294 gt42 precision turbo. im stilk debating what housing sizes to go with. i would love 1000hp out of the car but i know its costly and i dont want anything less than 800hp.. i have all the supporting mods to make the power and i want other opinions before i order the housings.. any help would be great

Hi mate have you still got the mirrors If so pm me your number and ill call you asap cheers josh

It depends on where u buy the clutch from i guess i bought a new hd exedy clutch and gtr racing flywheel for 925 shipped to my door and it only took one day. call this number and ask for simon and tell him josh from armidale gave u his number 0296481688

The end result is the AFM wires were spliced on instead of soldering.. Runs like a dream. thanks everyone for your help

Iv just got the afm off and found a wire not connected so im going to fix the wiring up and ill keep it posted.. thanks for both your help

Hi all i have recently purchased a s1 r33 and im having trouble getting it to run properly. i done a engine swap and now it wont rev past 2500rpm. It sounds like it is hitting some kind of limiter. the engine has been dyno tuned for 366rwkw at 22psi or 248rwkw at 15psi. its doing my head in as i cant find the problem. I have done these following mods, Custom turbo Fmic Bosch 023 intank pump sard fpr plugs dump pipe front pipe and exhaust new 02 sensor New z32 afm i thought it could be the fuel pump, fpr, plugs or afm so i replaced them all and the problem is still there. I have tried unplugging the afm and its the same and with it pluged in. the only thing i can think of is the sfm wires might not be hooked up properly. any help would be awsome regards josh

I have a s1 r33 with fmic and custom pipes tomei fpr bosch 023 fuel pump custom rebuild turbo Splitfire coils Greedy forward facing plenum 80mm throttle body 3 inch mendrel bend exhaust with custom dump and front pipe 550cc injectors new fuel rail Its making 361kw at the rear wheels on 22psi and 306 on 15 psi im yet to get a new ecu and forged internals and cam. here is a link i build me engine off http://www.nzefi.com/packages/power-upgrade/nissan-skyline-r33-rb25det/ cheers

Hi all i just bought my first skyline and i am wanting to get 400rwkw out of it. I am thinking of the following, Forged bottom end pistons rings etc unsure of crank. Plzz help?? Injectors. Plzz advise me of best option Intake plenum etc bigger turbo fmic hd cluth oil pressure reg coil pack plugs and leads new ecu. Plzz help again lol also i gather i will need new driveline any help would be great as i just sold my commodore and wanting to get 400+rwkw out of my new skyline. i will post some pics in the next couple weeks as its in the shop getting gtr wide rear fendors dmax wide front fendors trust s1 style front bar and nismo 400r rear bar with do luck side skirts. thanks in advance josh