Jump to content
SAU Community

R33Dan

Members
  • Posts

    136
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by R33Dan

  1. Sent a pm
  2. Hey mate well that idle air controller, its an AAC valve its located at the back of the plenum there is another thread on this. But basically it senses pressure in the plenum and sends a signal back to your ecu. I had a fault with mine caused it to idle irregular then just idle high (mine was around 1500rpm but have heard of 2000rpm) if you get some wd 40 or carby cleaner etc and spray the **** out of it the problem stops.
  3. Wanted an after market front bar for a s1 r33 and some 17 inch rims after something cheap....
  4. R33Dan

    Front bar

    Wanted an after market front bar for a s1 r33 after something cheap....
  5. Is it internally or externally wastegated, what sought of power is it good for and ya got any pics
  6. Well i had the same prob too it was shit thought it cause of my new zorst, but it was idling funny then constant at around 1600rpm so i took the aac valve off sprayed with a heap of wd40 and it worked at treat, but **** those little screws i droped one lucky i had a spare layin about.
  7. i have a stock cat back exhaust for sale its in pretty good nick (as good as a stocko can be) no pics but make me an offer.... :bs!:
  8. Stock cat back exhaust, muffler is a different (still twin pipe touch bigger but different from stock).... offers Stock bov works well.....offers
  9. These parts are still for sale guys make me some offers....
  10. do you still need a stock cat back
  11. pms replied to
  12. well with the combo of silicone hose and cable ties mine seems to be holding on fine but you could make some brackets if ya want.....
  13. Can someone please put a credible link or put it on this site all 32 and 33 manuals i would really like a copy
  14. sent you a pm happy puppy
  15. can someone please help me get a copy of this, give me a credible link and download, or can someone put it on this site or something even email it too me [email protected] i would really love a copy of it
  16. yeh that could be the prob also just check around
  17. Check the connections on the wire and make sure they arent touching each other or the body of the car and make sure they are all insulated with some electrical tape etc
  18. I just mean the switch on your dash board but that seems weird did you disconnect any wires when you were hookin up aftermarket mirrors
  19. sounds like your switch may be faulty if it is both sides, did one stop then the other or both at the same time
×
×
  • Create New...