Jump to content
SAU Community

omnigear

Members
 View Profile  See their activity

  • Posts

    385

  • Joined

  • Feedback

    0%

 Content Type 

Everything posted by omnigear

  1. omnigear
    how about the caddy CTS-V 1st gen front Brembos?
  2. omnigear
    that tranny must be screaming then . or was it a dogbone setup?
  3. omnigear
    so do you want feelings or factual numbers? because depending on a few factors their result will probably vary from yours.
  4. omnigear
    at the end of the thread which got it locked .
  5. omnigear
    We gonna be factual on this or its gonna b like the last one
  6. omnigear
    Mine is just raw , coil to plug.
  7. omnigear
    that seems like a good value . $600 for 4 years
  8. omnigear
    depends on where you are in the hp if you have 100hp and add 70-90 its a big deal , but when you are around 2k 70-90 is not that much
  9. omnigear
    damn all of that for 70-90 more ponies where does the power come at now? still above 4k?
  10. omnigear
    happen to share the raspberri display ? I want to replace my non working clock and put a screen there for the wb gauge, but they dont make anything commercial that fits.
  11. omnigear
    I got 2k inj from scott waiting to be installed, he also put spacer to fit it on the stock rail.
  12. omnigear
    Ark design boost controller is what i am using, decent for 150$usd no complaints
  13. omnigear
    thats not really saying anything compared to the ls1 coils that had a comprehensive test.
  14. omnigear
    FueLab FPR
  15. omnigear
    That turbo looks like it is going to rest on the right side when the engine shifts around.
  16. omnigear
    so for the power window switch bulb,headlight switch, hazard, and others there is no bulb you can buy that would be plug and play? like a t3 or t1.5?
  17. omnigear
  18. omnigear
    Im planning on getting the innovate boost controller/ wb combo since it can go hand in hand with Nistune
  19. omnigear
    360 USD for one. there is no fuel injector sub-harness for the rb26dett its part of the main loom http://www.wiringspecialties.com/rbenhaforskg.html
  20. omnigear
    my wires for the rb26dett injectors are dry rotting and needed to be replaced, I am going to use the rb25 fuel injector harness to replace it [ drop resistor deleted in the process ] by adding a connector to the rb26dett harness. The aftermarket injectors I am using , use the same connector as the rb's .
  21. omnigear
    bah why cant i edit... anyways stock connector is the same as the xspurt ones.
  22. omnigear
    wiring have different plugs you can choose from.
  23. omnigear
    Plug the inj to the rb25 harness , put a connector on the main harness, and install the injectors.
  24. omnigear
    The rb26 do not have the subharness like the rb25, the inj connectors are the same and i am not using a rb25 inj, i am using an xspurt 2k. I need to change my fuel injector harness due to it dry rotting, the sheathing is getting brittle. The lenght of the harness is long enough to make a cut and put a connector on the maon harness.
  25. omnigear
    to anyone wondering in the future I was told that it will work and i just need to match the wires.
×
×
  • Create New...