Jump to content
SAU Community

omnigear

Members
 View Profile  See their activity

  • Posts

    385

  • Joined

  • Feedback

    0%

 Content Type 

Everything posted by omnigear

  1. omnigear
    did you have the valve train noise on the previous oilchange?
  2. omnigear
    Most of the post is what they feel/hear/see/smell and nothing factual .
  3. omnigear
    change the gearing of the drivetrain. ^_^
  4. omnigear
    I know they are different, I am trying to see about using the abs actuator from a bnr34 along with the abs/ets computer. I know the plugs is also different.
  5. omnigear
    anyone dared open the unit and see if it is just a few transistors and resistors =p
  6. omnigear
    Sorry for the necro but this is the closest thread about my leaky ABS. Is it not possible to use the Bnr33 or the bnr34 abs unit? or a similar unit like the z32/300zx?
  7. omnigear
    share info?
  8. omnigear
    pictarz no workie =(
  9. omnigear
    I doubt that would have any major effect, if one side is pushing towards the other side of the car that bar will more likely just transfer it to the other side since there is no brace. a bar like a T would be more effective I would think
  10. omnigear
    Was it the clutch fault or some other part that caused it?
  11. omnigear
    TQ rating is more important than HP with clutches...
  12. omnigear
    Have you tried contacting KYB in AU?
  13. omnigear
    Wouldn't a F40 be sufficient with floating rotors for most driving needs.
  14. omnigear
    This is the only topic about vacuum hoses that i have come up in the search... what sizes do I need for all the vacuum lines? 6mm about 6feet?
  15. omnigear
    this, i have a faulty unit and even though the voltage was being sent to the sensor it would not heat up. you can light a cigarette if it works =p
  16. omnigear
    Have you check if the O2 sensor is heating up?
  17. omnigear
    I tried to search the forums and I cannot find information on the measurements for the front and rear wheel bearings. Im trying to get a set from timken for my bnr32. Can someone shed some light to my inquiry please.
  18. omnigear
    tried google translate on an android phone? ^_^
  19. omnigear
    So a crank collar is not the same result as an rb26dett from an r34?
  20. omnigear
    cant you just get a piece of wire run it to the battery and the fuel pump fuse to force it to turn on?
  21. omnigear
    Where is this resistor ballast you speak of? I am a noob in the RB world not sure if my bnr32 have this
  22. omnigear
    there are dead links is there a must for bnr32's that needed to be corrected for street/track setups?
  23. omnigear
    Pictures and update ^_^ , I want to assess if this is more cost effective than buying a kit.
  24. omnigear
    I am not sure if there is a r32 rear seat belt that locks when you pull it all out, reason being is that from time to time I have to put a car seat and it does not lock.... Last thing I want is a flailing car seat inside the car Nissan do not make them any longer here in Japan , so I have to sourced used parts yet I am not sure if there is one that will work for my need.
  25. omnigear
    Pictarz are down =(
×
×
  • Create New...