666DAN

Yep, the box next to me is 008 They'll sort all your dramas for sure.

As previously mentioned, that's what you get for not supporting newer models. You can't expect to thrive if you're stuck in the past.

I've got an exhaust temp gauge to fit and just wanted some opinions on the best location for the sensor, I've currently got a CES stainless split dump with HPC coating...so really didn't want to touch that., but then again I want the temperature sensor to actually be doing a proper job.

Rice me up also if you find a manufacturer

My last car was N/A + turbo...put the turbo ECU in to make things easier...isn't so with the R34's too much missing bullshit throws up the "check engine light" R33's use all the same sensors, they have the luxury of no Turbo pressure sensor, TCS, Secondary throttle motors etc etc The AFM's are the same between turbo and N/A just different between series 1 and series 2's

Yeah they butcher the lights bigtime, lots of HT leads they cut off and dodgy intercepting of existing wires :S

When I say inflatable they aren't the gay inflatable type you're probaly thinking, more like the strength of the lifeguard boats.

Don't do it!!!!

I was going to suggest the higher ethanol content, run low and fill up with an emergency 5 bottles of Recochem metho 95% ethanol. Do the test, pass with flying colours, quickly get to a servo and fill up with 10L of fuel, run it down to dilute the ethanol, then fill the tank up per norm. I can't see it hurting if done over the course of a couple of hours, I've done this with a corolla with a 4AGE, I ran close to pure ethanol in an emergency and it actually ran beautifully.

Yeah as far as I know the RB20 isn't currently supported, the R34's are as this was what he did the ground-up work on and was similar in development to the S13,S14,S15's It can be done though as I've had this chat with him regarding a mates RB20 S13....just when he has the time

No offence, but that's not a very good idea

Concerning....highly!

The second I've got them I'll show all

Look forward to catching up again Geoff, be it in a less relaxed environment...but hey I'm sure we can get on the turps again

Suprisingly yes, I'm moving onto every light in the car...just finalising the correct globes that give max brightness and performance. Got some sweet Luxeon brake lights in the pipeline

Hold-ups and car-parts are bedfellows

Yeah not much, trying to g up these LED's I've got elleventy billion people after them and my next order is basically goooooone

Hey people. what's doing on this fine day?

He's in Brisbane now dude, nice and local to give me 24/7 product support need be Sure is, my 34 runs the rom and it works great!

I've seen some cool inflatable ones, they'll keep the car roof safe also

You can just use 1W ceramic resistors of the same ohm rating in line with the injectors, way cheaper at about $0.70 a resistor

SOLD!!!!

Awesome!

Nah, the dash is pain and needs lights that are 10mm in diameter or less, they overhang the wedge base..so "no deal"

Seriously anything over 75mm is overkill, I can only get about 1/8th of my cooler warm with a good thrashing. Unless you line on Venus or have a billion hp then it's too much work trying to fit huge coolers