666DAN

Idris apparently can't maintain anything over 30mins of game play as his fitness levels aren't as high as they should be (I've heard) so they just bring him out half way

No discs?

I know what I'd be getting

Yes there is enough room (just) to replace the injectors without removing the runners or manifold, you just have to decide what method will be more of a c$#t to do.

No way, it's the factory fitted periscope button

Full of win!!!

Whoretown is a lie!

Thumbs up for Deatschwerks high flow injectors, the set are matched for flow and checked for correct spray patterns

In-som-nia

I've seen you around the area, wasn't that Lyndons old car as well?????

They may actually work out reasonably priced if you source them through Nissan NZ, Auckland City Nissan are always willing to ship to Australia.

R34’s are a fickle mistress, they’re good cars though. The Nistune flexibility is great, great concept.

Just use an R33 one, does the same job That's what I put on my old 25GT when I wired in the gauges, it has exactly the same voltage/pressure range output to the dial.

Bit of thin MDF and some car carpet from bunnings?

Yeah the pictures don't do it justice, I wish I could be driving behind my car all the time, at night it's mesmorizing

Too easy mate, the new boards will arrive with me on the 25th June and be ready to go Already had lots of comments from people out and about (I've explained the current 'broken' LEDs haha) they like the look with a more continuous ring.

With the boxing start out at 10 mins (may not sound like much, but wait til you do it, it'll feel enough especially after doing weights and your shoulders are a little fatigued) Then move up to an additional 5 mins after 2 weeks and repeat every 2 weeks. Hey I've been going a while and still find my limit to be 20mins as it does get a little mind numbing and does eat into your day timewise after a weights routine. Also if you can, get hold of a heart rate monitor with recording/download function (I got a cheap little garmin) these are great to track your progress during a session and keep an eye on your HR and stop any slacking off They're also great as over time you can see your max HR drop for the same effort as your fitness improves. Eventually you don't need to rely on them as much as you can have a pretty good idea of the effort you're putting in from how it feels.

Andy, what was working for me was a weights session and then straight into 20mins flat out on the punch bag. Consistancy is the key and about 4 times a week is good, maybe break it up with weghts and a run one day on the weekend. Either way I dropped 10+ kg in 3 months with this routine.

With my ones it would have been better to leave the original fabric on, I think it would have formed much better that way. The downside was they needed my covers to make the copies form, so they all came off

That's not very nice, at least the guy that took my pattern did it for nothing!

If it's the proper moulded dash I'd be suspect. Can you remember what colour the steering fluid reservoir was? Normally the fatal mistake people make is leaving the clear n/a one in, when it should be black on the GT-t

http://www.selleys.com.au/Building-Constru...es/default.aspx like silicone but better just thinly apply to the overlap of the aluminium and stick in place over the lip of the firewall holes, will be very neat If you can get the aluminium sheet cut as close as possible to the edge of the lipped section it will be fairly seemless.

From my dealings, I'd go as far to say they do EXACTLY as asked with regards ro manufacturing, you just have to ask the right questions and make it VERY clear. A long time ago I asked that I had a certain component used during manufacture (as it was a higher quality), thanks to a language barrier they took it to mean I wanted the documentation to state the part was used (when it really wasn't) Once I had explained that they HAD to use the part for the item to be reliable they were more than happy to continue down this path and have never deviated from this course. But as shown they are more than content to keep the customer happy, even if they think they're mislabelling etc etc to get a sale. This is where less than honest suppliers will utilise their lenience and get dodgy things made cheaply. "Just following orders"

Get the ovals and circle traced and cut out of aluminium sheet, liquid nails in place to seal. Will be nice an neat. (I've even sprayed them lightly with bayside Blue

BOV is gone, but found the adapter the other day $35 delivered