nes 1871

I disconnected a blue plug that i think is the IAC valve and it dose idle the same just plays up after i give throttle

ok guys bit of a mix up by me. Instead of taking off the ACC and cleaning the spring and screw i pulled off the ACC solinode. I just cleaned it and put it back together thanks to DIY search and I then begun to set the idle screw. I disconnected the ACC plug and I found myself closing the screw all the way down to get to 900rpm i open it abit and now im getting 950rpm but car gets to 1200rpm even 1500 sometimes. this happens when i give it abit of throttle car dosnt react when i brake or turn the stearing wheel.

Im looking at focusing my attention on the AFM and TPS and do abit of research

I removed the ACC and cleanded the buid up (there was abit of oil or carbon) still has a bad idle (reving up and down) I tryed to locate the IAC but couldnt find it but with some help from a helpfull message that was sent from a SAU user (thanks again for the info) I turned my attention to the air regulator I blocked it started the car and it is still has a bad idle

Thanks mate I'll let u know how i go

also guys I have not cleaned my Iac or ACC but will clean them tomorrow. The car is R32 gtst rb20det turbo r33 turbo, Hybrid intercooler, it has a mines ecu in it not sure if it is original and a apex pod filter

Hi peeps, I recently bought my first Skyline with some damage to the drivers corner. Panel work is done (: so i started looking at the engine. I started the car and the idle was rough with it idleing high and low very quickly I noticed that one of the injectors where leaking so I pulled them out got my injector guy to have a look at them and he found two to be faulty and need replaced. I got 2 injectors and serviced them and wacked them back in. Started the car it has fixed the rough idle car still seam's to be a little out on idle but rev meter says 900rpm and it idles high and low???? Has anyone had this issue help would be very much appreciated. Thanks guys I have gone over my hose's with carby cleaner, Blocked my BOV (put a plate over the gasket) and checked my wastgate (not seized)

Hi peeps, I recently bought my first Skyline with some damage to the drivers corner. Panel work is done (: so i started looking at the engine. I started the car and the idle was rough with it idleing high and low very quickly I noticed that one of the injectors where leaking so I pulled them out got my injector guy to have a look at them and he found two to be faulty and need replaced. I got 2 injectors and serviced them and wacked them back in. Started the car it has fixed the rough idle car still seam's to be a little out on idle but rev meter says 900rpm and it idles high and low???? Has anyone had this issue help would be very much appreciated. Thanks guys I have gone over my hose's with carby cleaner, Blocked my BOV (put a plate over the gasket) and checked my wastgate (not seized)