abu

You will notice a difference, its worth going to an SAFC in my opinion. I sold mine to a guy with a NA Supra with a few mods, such as exhaust and CAI. He go this tuned as from factory like most cars, they are tuned to run ruch. He picked up I think about 10rwkw? Which isn't a bad increase in power, feels more punch to drive and revs a lot smoother. He now also gets better fuel economy. No need for a standalone ECU for an NA car, there is just not that much to tuning required as oppose to a turbo car.

Off topic, but I like your plates man lol

I am pretty sure on the website as well you can get a wiring diagram. I know I have an installation manual with my one which shows you how to wire it up to different cars. Hope some of that helps a little. Abu

Microtech also uses no AFM if you are looking for an alternative to a WOLF3d. Not sure who is using it in an R34, but seen a few using it in R33s. Seem to make good power. I have a PLUG & PLAY one for sale, which plugs into RB20/25, but not sure if R34 RB25 is the same? Have a read through the link below, you will see who is running a Wolf and what sort of power they are making. http://www.skylinesaustralia.com/forums/in...showtopic=55845 From what I have read about WOLF universal units, they are not that complex to wire up. I am pretty sure you could get it installed and tuned for about $600? Depends how good/confident you are with cutting ECU wires, you could probably get a wiring diagram and do it your self. It is a standalone ECU and will run everything as your standard ECU does, besides AFM, obviously.

Hey Adam Na no compliance man, car just came from Japan about 4 weeks ago. Hehehe

Yeah I bought a boss kit of him, very nice guy. He came and had a look at my car when it arrived from Japan. Would love to cruise with you guys one day man, just need to get the car complianced and on the road. Keep wasting my money on modifications that I cant even use yet lol Hahah only reason I have it that low is because I am on an unregistered vehicle permit so cops cant do shit. I lowered it a little more onto some stock R33 wheels which I put on for compliance, looks fair tuff. Will raise it up after compliance for more drive ability on the rims, its hard to get around with it that low. Abu

Would just like to add that WOLF3d has a built in security function. What this function is, is a 4 digit pin code that is inputted into the ECU via the hand controller. When this function is active, the pin code must be entered to start the car. When this pin code is not entered, no ignition or fuel is supplied to the motor, therefor is impossible to start. You can nominate to set your own pin code, and the security feature is able to be turned off/on.

Got one now. Thanks, Abu

I am selling my WOLF3d plug and play unit for a RB20/25. Will plug straight into your loom, and can be tuned via hand controller. Very similar to a PFC except it doesn't use a air flow meter, uses a MAP sensor. Let me know if your keen, I will do you a good price. Cheaper than any PFC you will find for sale anyways. Abu

Hey I am selling my WOLF3d plug and play unit to suit RB20/25. This unit plugs straight into your existing RB20/25 loom with no modifications required, much like a PFC at half the price. Unit is in perfect condition and working order. It has barely been used and the condition reflects that. Also has the mounting brackets to sit under your kick panel nicely. Also includes; -Hand controller - for real time display and you can also tune the ECU with it. -Memory stick - enables you to run multiple maps/tunes and you can switch between them via the hand controller -Installation manual -User guide/manual -Tuning cable - plugs into ECU and laptop to tune via laptop -WOLF software It comes in all original packaging with the original box. Also has warranty papers and warranty card if need be to take it back to AEM. Also has 2 WOLF3d stickers for wank factor. Hand controller is in mint condition, still has plastic protective sticker on the screen. This unit uses a MAP sensor, so there is no need for your AFM (air flow meter, eg z32, q45). Asking price is $1,100neg + postage at buyers expense. Located in Melbourne, south eastern suburbs. Any inspection welcome, and all reasonable offers considered. Not in a rush to sell, so don't waste my time with low offers. Contact me via SMS/call on 0416 623 381 or PM. Thanks, Abu

Ah awesome. Thanks heaps man.

Got one now.

Still after a stock shifter stick

r32line, is that Alex's car in the middle?

Hahaha no worries man. Hopefully see you there. Abu

Also interested to know what car it suits. If its for RB20DET just put it as sold and PM me your account details, I will take it. Thanks, Abu

Thanks man, names already down. If all goes well car will go in for compliance next week! Abu

Few recent ones of mine

Much appreciated! Would be very keen to see how it performs. Have you driven it at all yet?

You couldn't be in Melbourne could you!

Yep, top feed. Yep, RB25 injectors are side feed. A set of NISMO 550cc or something similar would work great.

Na man, after market coil packs wont be needed till they give in. If it runs fine on standard coilpacks just leave them. Plenty of people running that sort of power on standard coil packs.

APEXi Power FC Injectors Turbo (HKS XXXX) Fuel pump (fuel pump) FMIC kit Clutch kit (EXEDY) 240rwkw - 260rwkw for a safe tune depending on turbo.

ECU isn't really required till you upgrade turbo. I say this because stock turbo can't really go over 13psi, so your safe to run about 12 - 13psi which is find on stadnard ECU with support mods (FMIC, pump, etc) Once you go bigger turbo, basically it can obviously take more then 13psi, and you will want to run more. Increase flow will make more power on lower boost compared to your stock turbo. Once you get to this point the best thing to do is get the car tuned. A tune will show best results/gains in performance and is also the safest thing for the engine.

GTRS is about $1300 new from forum traders. HKS2535 I seen pop up on the forums for about $1,100 odd 2nd hand. I think there is a GTRS for sale for about $1,200 in the for sale section?