SXN180

I've just finished my RB20DET converison in my 180SX. I have come to the wiring stage and wanted the ECCS diagrams so that I can match them up with my CA18DET diagrams. I know all I need to hook up is 3 wires from the 6 pin rectangle RB plug that is located near the passenger side headlight attached to an 8 pin rectangle RB plug. The wires in the 6 pin plug that I need to connect with my harness are Black/Red, White/Black, White/Purple. The only problem is I don't know what they are for and was hoping the diagram could tell me so I could match them to the CA's main harness. I have already wired the fuel pump wire (black/pink) into my CA main harness. I just need to know the rest so that I can wire them up. Cheers

Thanks Maggala but your R32 wiring Zip doesn't contain what I need. I had already down loaded it. I need the wiring diagram for the ECCS Engine Loom and Engine Bay Main Harness. Your diagrams are for Power Windows, Speakers, Blower fan, Hicas control unit etc.

Hi All, Just wondering if anyone has the ECCS and ENGINE ROOM wiring diagrams for the R32 RB20DET in PDF format. Please don't tell me to go to meggala.com or rb20det.com as they only have the ECU pinouts. Any help would be much appreciated Cheers, Daniel

Hi All, If anyone has a set of RB20DET manual flywheel bolts could you please let me know. Would prefer Sydney seller as I need them by this weekend. Please call 0408 226 821 or leave a PM. Cheers, Daniel

Hi All, I'm after a RB20DET manual tail shaft for my converison in my 180SX. Would prefer the seller to be in Sydney as I need the tail shaft this week. Please leave a PM or call 0408 226 821. Cheers, Daniel

Hi All, I'm after a R33 Engine Crossmember for my RB20DET conversion. Located in Sydney. Please leave a PM or call 0408 226 821. Cheers

Sorry guys, Don't have any air vents on the dash , they have all be cracked. I didn't get the bonnet with the cut. I have used the loom for my conversion. The bushes all look to be new, I think the assemblies have been reconditioned in Japan as it looks like they have been taken out. They have been respayed in new black paint. They are still attached to the cut and there is no sign of overspray under the guards. Cheers

Bump

Sorry dude, The stereo and climate control module were removed before I purchased the halfcut. Everything behind the dash is available though Cheers, Daniel

Hi All, I have the following bits leftover from my RB20DET halfcut. I bought the cut with 57232kms on it. 1. Automatic gearbox complete with shifter, crossmember, tourqe converter and flywheel $100 2. L & R hand hub assembly's with all arms and bushes minus brakes and struts $100 or will seperate for $50 each side. 3. Power Steering Rack $80 4. Standard front sway bar $40 5. Brake booster $40 6. Glove box $20 Any other parts that are located under the dash ie: Blower fan, heater core etc are available just leave me a message on what you are after. Located in Sydney. Call 0408 226 821 or leave a PM Cheers

Bump

Found a flywheel. Thanks Bl4ck32 Please delete this post. Cheers

Bumping Cheers

Hi Jayson, PM Sent Cheers

Thanks for the offer Blitz Boy. But I'm doing an rb20det conversion in my 180SX and its much easier to bolt the R32 Gearbox in. Thanks anyway.

Hi All, I'm after a Manual ECU for my RB20DET. Located in Sydney. Please call 0408 226 821 or leave PM. Cheers

Hi All, I have found a gearbox. Please delete this post. Cheers, Daniel

Do the standard RB25 and RB20 Turbos bolt straight up to these manifolds ?