dnb

these ones look good http://www.calaisturbo.com.au/showpost.php...mp;postcount=30

thanks guys.

yeah thats what im thinking

hey guys,sorry for the random post but im about to make a manifold for an rb26 and i only have an rb25 head to work from. i know the stud patterns are different,thats not a problem. i assume the ports are spaced the same on both engines,am i correct? cheers

what is the new rpm limit of this combo?

any engineering supplies shop. get slot head screws as you can get them off again when the time comes unlike philips head ones. and loctite them in!

no sorry the first 5 posts are from ages ago, different engine lol,

yeah its got plugs lol,but thats exactly what it feels like. i just put it to tdc and each cam pulleys dot to the mark on the timing cover back plate. so i assume cam timing is correct. ignition timing cannot be checked yet because the bloody thing wont run lol. but its the same map that was previously in it so it should run(made 456rwhp as a 2.5l)

yeah i realise that. my problem is we have just put a new rb25/30 in my mates car and it wont fire. it has fuel and spark. the engine sounds funny when it cranks and seems to spin very easily. my other thought is possibly the hydrualic cam followers are not primed up and the valves arent opening much,if at all. it is also running a microtech which was running the rb25 previously.nothing has changed there. any help seriously appreciated

URGENT can somebody please please tell me how many teeth dot to dot on an rb25/30 with the 152 tooth timing belt(tensioner above water pump) thanks guys

thread from the dead. the oil pressure problem was tracked down to the external vct line being too big. URGENT can anybody get me some dot to dot figures for the rb25/30 with the 152 tooth timing belt. thanks in advance:)

hey guys im chasing an r31 auto vehicle speed sensor. please pm me if you have one, or better yet email me at [email protected] thanks a lot

borg warner gearset. 4.11:1 ratio,used $200 28 spline minispool to suit $100

i agree,its giving m a headache and the posts are wider than the screen can fit so you have to scroll across every line. very annoying. can you change the skin at all?

hey guys i need a rb20 block ,condition doesnt matter. wollongong /sydney area preferred

my friend has a standard internal rb25 making 343rwkw with a gt35r/106. its a huge rear housing for a 2.5l engine but it makes 25psi by 4500rpm. i suspect the gt30 with .63 will be at 25 psi by about 3500rpm

any idea if a 25 clutch kit will bolt up to a 20 flywheel?

hey guys i searched and didnt find justy a quick q about the 20 and 25 flywheels. are they the same? cheers

i reckon the throwout bearing is sticking on the shaft. as for the paint worn from the pressure plate,thats wierd,very wierd

hey guys im chasing a ltx12s. pm me if you have one for sale . cheers leigh

yes andthen there are the ones who have done it and been disappointed when all their boost ends up in the sump.

they will go for ages mate but at 200,000 klm its not gonna be able to take big boost very well. if you want to mod it ,its time for a freshen up check out www.calaisturbo.com.au its an awesome site for vls

sounds like a crock to me! guys at work used to have everything! its almost as bad as tafe!

your location?

progress pic