boostn32

ohh hang on your in melbourne, sorry maybe i should read before posting, lol

I do a lot of work with brake's and components, im on the Gold Coast if you want to shoot it down to me one night i can pull it down, inspect and then let you know if it can be repaired, but if you can wait a week and a half i can have it all done in a day if its repairable.

Gts30t yes i do make them. i have pm'd you anyone else requiring one just shoot me a pm

worth the effort, and Omurru you got the good spacer, the one you have is the proper designed one, they are not that hard to do, just have to be willing to stretch the arms and have some muscle to get them out. i have replaced quite a few of these with the spacers i make.

DAS KAMU pm sent simple tool, yes i can rebuild your brake calipers, it is time consuming due to cleaning them out and fitting all new seals, but its well worth doing, i think most people would be surprised as to the amount of dirt/sluge that builds up in the calipers and around the pistons. you will need to leave your car with me for a few hours to do the job. pm sent out laying charge details.

i can make you some and send them to you, im from the gold coast though

How soon do you need them

yeah no flooding here, all is good. i will see if i can find any thing with ur clutch or box when you come.

Hey imperio, did you get your car looked at, i would be looking at the clutch, and then the gear box. was there a smell from the car, did the shift into first feel normal or did it feel really loose?

Hi im just putting some thoughts together on setting up a 32gtst for drag racing. whats the best way to get the rearend to squat remembering that will cause negative camber. should the front setup be changed to suit? its currently for circuit racing and quite firm all round. what have you found that works best, soft springs, pineapples, adjustable camber, suspension height.

will do a 25 box in and out with full cluch kit replaced. including spigot and throw out $180, i may or may not beable to machine your flywheel myself, waiting on new machine. if i can do it its + $35 if not i can arrange it for + $50

I know GTR's have a hole in the R/H side of the engine bay just above the rail under the battery in 32's, this is covered by a plate that is spot welded and can be removed and the intercooling pipe goes through there. its the same as having a GTR its a factory hole and is legal.

IF YOU HAVE A DEAD OR BROKEN CA18/SR20/RB20 OR 25DET MANUAL GEAR BOX I WILL BUY IT IF ITS CHEAP. IF IT GRINDS OR DOES NOTHING AT ALL I WILL TAKE IT OFF YOU, GOLD COAST/BRISBANE LET ME KNOW WHAT YOU GOT!

is it still for sale, if so how much for postage to gold coast, swing it my way.

Just look for the black exhaust marks, 9/10 times its the gasket from manifold to turbo. when the exhaust builds pressure under load between head and turbo it will find a weak link = either manifold to head or manifold to turbo.

if i remove the rear disc's i will fit the new pads when it goes back together.

lol, ok serious time. offer's taken on everything.

dont need me to supply you with one, there's just about one on every street.

will all depend on who fix's it, i may have a hose depending on what one it is.

no sorry its not reinforced, i wouldnt use for boost, would be ok for suction side of turbo and for cooling system

I have various hose's forsale need the room so all must go. 1. PLUTONE 'A' SUCTION HOSE 16MM APPROXIMATELY 9M LONG $35 Helisteel is a clear wire reinforced suction hose that is ideally suited for applications that require continual bending or flexing. It is a heavy duty non toxic hose that is clear, allowing you to view the contents of the hose during operation. Helisteel will transfer a range of foodstuffs including wine and fruit juices. Also suitable for the conveyance of fresh or salt water, slurries, pulverized solids and a wide range of chemicals. 2. MULTI-PURPOSE/FOOD CONTACT HOSE 10MM 8.1M LONG 1.6MPa W.P $30 3. MULTI-PURPOSE/FOOD CONTACT HOSE 12.5MM 13.3M LONG 1.6MPa W.P. $45 4. MULTI-PURPOSE/FOOD CONTACT HOSE 32MM 6.7M LONG 1.0MPa W.P $45 5. MULTI-PURPOSE BLUE SILICONE HOSE 38MM 1.35M LONG $50 6. MULTI-PURPOSE BLUE SILICONE HOSE 63MM 1.12M LONG $40 7. MULTI-PURPOSE RUBBER HOSE 300PSI 25MM APPROXIMATE HOSE LENGTHS $30 67CM, 78CM, 1M, 97CM, 66CM ALL 25MM ID 300PSI GOODYEAR/MULTIFLEX SERIES II 8. MULTI-PURPOSE RUBBER HOSE 250PSI 1 1/4in 31.8MM 1.74M 250PSI GOODYEAR RUBBER $35 9. TIPAN SUCTION HOSE 38MM PETROL/OIL 1.4M $35 10. TIPAN/COPPER HEAD SUCTION & DELIVERY HOSE 63MM PETROL $45 SUCTION HOSE LENGTH IS APPROXIMATELY 1.13M, 57CM 63MM ID DELIVERY HOSE LENGTH IS APPROXIMATELY 70CM 63MM ID 11. SUCTION HOSE 63MM PETROL/OIL VARIOUS LENGTHS 2 X 90CM 80CM 63CM 60CM $45 ALL ARE 63MM ID MADE IN USA WILL SEND BUT PREFER PICK UP FROM UPPER COOMERA,

wtf did u not get my pm y the f put it on here than not respond.

You could bring your car to me, i will fix your squeak. lol. generally when your brakes start squeeling there glazed. if there is plenty of pad left take your pads out, rub them on some sand paper on a flat surface and give your disc's a rub over to take the shine off. also check the plates that sit behind your pads in the caliper, make sure its free of brake dust. hope this helps. Luke

being a fellow skyline driver i know how expensive it is to mod our cars, so i do it to help out other members. I dont think you will find a cheaper price.

LOL sure will give you a text tomorrow or is it sunday already.