boostn32

enzed, pirtek, etc all have and do what you need.

SOLD!!! pending payment.

yes.

I have a brand new Defi 80mm boost gauge for sale, has white face, all wiring, never been fitted and still in box 0401805955 Luke $120

I have entered but the car still hasn't been started, still making parts and waiting for bits to arrive, dyno tune on Thursday. Hoping to start it today for the first time in 2 years. hoping for low 11s

will you sell microtech dash by its self, is it 2 or 4 line

pm sent

if its the same as a 32 or 33 flange i have one. pm me if you want it and will work out a price. will be less that just a bare adapter

Hi im after a GTR 6 bolt diff flange that the tail shaft bolts to, im assuming there all the same but if there not a 32 one will do the job. Or a 300zx one as i think they are the same Thanks Luke

i have some 35mm ones brand new.

can anyone tell me the height relation between the round part at the top of the gearbox where it comes through the hole in the tunnel for the gear stick and the top of the tunnel its self, eg; should they be level, gearbox above 5mm or bellow 5mm? Thanks Luke

found the problem, selector shaft is in upside down, never can rely on others sometimes

i found the problem, the shift selector shaft is upside down, i maybe able to punch the roll pins out and turn the rear part on the shaft then put new pins back in, what a pain

I brought a GTR box and it didnt come with a shifter so i got one and went to fit it but i have found that the bottom cup doesn't reach down far enough to go into the shift rod? why could this be? i have compared the gear stick with another GTR one and they are the same so there must be something with the box. what are your thoughts Thanks Luke

I have a problem with my gtr box, i didnt get a gear stick with it, so i got one and went to fit it and found the end of the stick doesn't reack the selector rod, I was wondering if someone in brisbane/goldcoast has a gtr box i could try my shifter in or look at. Thanks Luke

are the shocks adjustable at all?

If any one has a car trailer that i can borrow for a few days for jamboree in 2 weeks let me know. I would rather give you some money rather then give it to a servo. Thanks Luke

Who is going to jamboree, who has entered and what have you entered in, just thought if others have entered maybe we can all pit together. Just a thought.

need say no more, you would be suprised who he builds engines for.

As topic says are 32 gtr front upper camber arms the same as 32 gtst? Thanks Luke

so i can run both pumps off 1 30A relay?

so i cant use the 30A relay for both, should i put a fuse to each pump from the relay, what amp fuses?

Hi im currently trying to wire up my fuel pumps, i have a 500hp walbro in tank and a bosch 044 external after surge tank. how many amps would these pumps draw combined? would it be safe to run both out of a 30A relay that has two power out terminals? im using the factory fuel pump wire as signal wire, that has a fuse on it. do i need any other fuses? im assuming the intank would draw bugger all amps as its not required for pressure just flow to fill the surge tank, also the 044 is mounted under the car so will get cool air flowing over it keeping it cool? when puting the battery in the boot of a 32, do you need to run a earth cable to the front or just a good ground in the boot? where do you run the power cable to in the engine bay and hook up up the factory stuff? Thanks Luke

well soulds like this stuff is up to the job, Thanks

im wondering if the silicone hose in the link would be suitable for use for vacume/boost signal lines for waste gate, fuel reg etc. safe with 25psi? http://cgi.ebay.com.au/5-metres-BLUE-SILIC...=item1e5cc66649 whats the best size ID 4mm, 6mm? i would think 4mm ID would be fine.