Jump to content
SAU Community

Mikha1

Members
 View Profile  See their activity

  • Posts

    147

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by Mikha1

  1. Mikha1
    Headlights look awesome. How much power did you make with the op6?
  2. Mikha1
    Hi all, My r32 rb20det can be heard vibrating and is felt through the gear lever when hitting max torque, particularly in the lower gears on full boost. When not on boost or mild boost, all is good. I was told the flywheel wasn't resurfaced before the new clutch was installed as it didnt 'look' like it needed a resurface. Would this cause the vibration? I dont believe it is drive shaft related as it happens at any speed but correct me if I'm wrong I'm looking at getting this rectified asap as i know it can cause damage.
  3. Mikha1
    I recently done it with a big grinder. It sliced through the outer and inner skin nice and easy. I wish i was told this when i cut it, but the cut is not a straight line. It curves slightly. I plan on welding a plate to close the gap between the inner skin and outer skin. I'm going to run an n1 bonnet lip and a gtr grill which i will cut the bonnet latch to sit further in
  4. Mikha1
    Hi As topic states, i have these wheels sitting in my front yard doing f all. Two have hairline cracks along the lip but still held air fine. I recommend repair before use. Tyres are down to belts. $100 pickup or swap for something of interest to suit r32 rb20det such as: Bride sl seat rail Gtr injectors (will accept a set of three or four to fix my leaky ones in the interim) Aftermarket exhaust Located west sydney fairfield Pm me
  5. Mikha1
    Sold pls delete
  6. Mikha1
    found. pls delete
  7. Mikha1
    I will try for end of the week
  8. Mikha1
    If only you were willing to post to nsw!
  9. Mikha1
  10. Mikha1
    Sorry for delay
  11. Mikha1
    Can definitely be used without a blitz bov. Ill supply the replacement pipe. I'll get a pic tonight of the core from front on
  12. Mikha1
    Hi, As topic states, I'm in need of a used front mount intercooler kit to suit rb20 / rb25. can be a cheap china hybrid style one. I don't care, as long as it doesn't leak or is too badly damaged. I'll also accept just the pipe kit as I have a core sitting around. It's going on my r32 gtst drifter, so the cheaper the better! Pick up sydney or will pay for post
  13. Mikha1
    Its most likely the amp assy found in the driver's side door. Its a black box with a circuit board inside. The solder joints go bad over time. I would suggest you try to resolder all joints on the board
  14. Mikha1
    I would lend a hand but I have a game on tonight. I would generally look out for the following: R32 body specific: Rust in rear quarters, rust underneath the floor pan in the driver and passenger foot well, rust on the chassis rail underneath the brake booster from previous untreated brake booster leaks, inner front wheel arch rust along the strut tower. Driveline: Check HICAS ball joints in rear knuckle. If you cant jack the car up from the rear end to check for play in the rear wheel, a slight knocking sound from the rear end over bumps and sketchy steering on load is a tell tale sign. Plus the general stuff that a 20+ yr old car comes with =)
  15. Mikha1
    Thanks guys. picked it up the other day and im stoked. Even the colour was almost a match, so it saves me from painting the thing for a while
  16. Mikha1
    Hi, selling a Greddy side mount intercooler to suit rb20 r32. Rb25 is slightly different and will require modding to fit. Not sure what though. The core measures 190x100x240 which is almost double the stock one! Comes with shroud and blitz bov as pictured and the correct pipes to make it a complete bolt on option for a stock vehicle. You can convert your front mount setup back to this side mount setup (to keep the po po happy) as long as you still have the complete hot side pipes and the stock crossover bov j pipe. I want $300 It's still on the car and is coming off this weekend Located sydney west fairfield. Will post
  17. Mikha1
    Thanks for the bump guys. XRB26X PM SENT
  18. Mikha1
    Link doesn't work.
  19. Mikha1
    Hi, as topic states, I'm looking to purchase a GTR front bar to suit my R32 skyline gtst drifter, so it doesnt need to be flash. In fact, the cheaper the better. It can have some damage as long as its all one piece. let me know what you got! Im located in Sydney west, 2165
  20. Mikha1
    close thread. found a set
  21. Mikha1
    Have you tried broadening your search to other models? Im fairly certain BCNR33 suspension will fit and even BNR34. If you get desperate, R34 GTT and GTV should fit too (If they're factory struts, the fronts wont be valved for the extra 4wd weight up front, so it will sit at a strange height) Just a thought
  22. Mikha1
    That guy got there 2 years before you
  23. Mikha1
    sounds like an early one, blue background cluster. I happen to have one sitting here
  24. Mikha1
    +1 thats how things are bought online lol
  25. Mikha1
    Your best bet for redemption is to register a dispute investigation through your bank to recover the amount and contact authorities if you haven't already done so.
×
×
  • Create New...