Just sourcing information on GCG Garrett TO4Z (800hp)
Will it make the 800hp airflow potential?
Does it run a T66 Comp Wheel?
What turbine wheel is it a P Trim?
I am lead to beleive it is the same as the HKS TO4Z all except for the compressor cover?
Apparently Garrett supply the turbo core and wheels to HKS then they do their mods , is this all true or a load of bull
Can someone enlighten me
Has anybody tried either Garrett or HKS with results?
Jaffa
Guys some more info on turbo as some have asked i would like to move it as I want to upgrade to a large turbo
This turbo has the GT40 compressor wheel and has a slightly smaller turbine wheel than the 700hp model
GT30
SB8006 part numer
700177-0014 corenumber
0.70 comp A/R
64 Trim
GT40 Comp Wheel
2.41/3.22 Comp Wheel size
600 HP Rating
65 Comp Flow
1.06 Turbine A/R
84 Trim
2.16/2.36 Turbine Size
this info is off Ray Halls site
Require a GTR 32 or 33 front tail shaft in good condition,... so the front shaft that goes from the transfer case to the front diff
Also looking for a drivers side complete front axle from hub including the input spline that goes into the front diff also in good condition
Please pm me if you have any of these thanks
thanks
J
I couldn't tell you any answer's to the above questions as i have never had it on a r33, ..may pay to ask the question to someone in the know ,... i do beleive they do run GT30/40 on GTR's
At a guess for street use the exhaust housing would be a size to large as it is a 1.02 A/R
Have a nearly new GT30/40 forsale
It has done all of 1500km and only been run to 1bar
I beleive it is rated at 600hp
Core number is in pictures attached
Pictures are as it came off car as you can see compressor wheel is still spotless clean
Looking for $1800
email [email protected]
Drewecrome if Spoolup's GT35R has been sold,... I have one with only about 1500-2000k on it is forsale ,....can supply pics monday if necessary,...the only difference is that it has the 1.06 exhaust housing apparently making it the 700hp version depending on who you speak to some say 600hp
Must state that this offer is only here if spoolup has moved his
I hope i am not breaking any forum rules by doing this
email [email protected]
I have a GTR 34 V-Spec rear diff with the 3.5 ratio and I have been told that the lsd unit won't work without the external oil presure pump ???
If so is there another way to acheiving the LSD unit to work or does it need this pump ,....i have no idea when it comes to the V-Spec
Or is the best option, replace my GTR 33 4.1:1 ratio with the 3.5:1 ratio gear set??
My first thoughts were to just bolt in the 34 V-Spec diff as a complete unit and this would be the easiest as well
I forgot to mention also have the front matching diff ratio so this is not a concern
Any help would be great
thanks
jaffa
Hi Guys
Chasing GTR 32 front uprights and uppercontrol arms for both L & R sides
so basically the bits that mount to the upper parts of the front hubs and body
thanks
jaffa
Hi Stephen
Mate i have aquired a front end yesterday ,.but still don't know exactly what is with it yet as it hasn't arrived ,.......
Do you mind if it is missing stuff,... I chase you up then
thanks
jaffa
Looking for a 33 or 32 GTR front cross member complete with hubs, control arms, steering rack, axles and maybe Brakes open to even some of the parts
actaully any of the parts would be great
Jaffa