Bo0sT_JuNkY

i need the oil feed ,water lines for a rb25 or rb20 turbo.any condition or location And a external wastegate or anybrand or size under $500

just after the specs ,A.r +trim or a rb20 roller turbo

not for a mounth or so,but just wanting to no how many are going around

can u find out exact spec's of width,offset,pcd .Should be on the inside of the rim eg 18x7.5 J offset should be there to.

Parts on the way ,Thanks Supra Man

I need either rx7 turbo (550cc) or r32/33 gtr(440cc) injectors,Only need 4 melbourne sellers only.

BUMP $1050ono

u need to get the wheel arch's flared about 1 inch because the offset is to suit a 33 gtr which have wider gaurds.I Had them on my gtst, but my car isnt lowered so they stuck out the gaurds .U may be able to squeeze 215 tyres and clear the wheel arch like the drifters do

Needed Asap with or without tyres .MELBOURNE ONLY

Bump ,Need to sell asap not resonable offer refused.

Got a set of racing sparco "crimsonic" wheels to suit gtr or gts-t with wheel arch mods. Front tyre are bald on the inner's .Rear are 70% 255/50/R17 $1500 ono Also will swap for stock r33 gtst wheels +cash pics soon

Sorry guys it's sold along time ago,Didnt no this post was still on here

I used to have a turbosmart bov on my car with the spring set to "hard" i used to get a fluttering noise when backing off under low loads.I now have a stock bov which runs better but has a gay shhh to it.Now if i blank off the stock bov and run the afm on the i/c piping will i get the vl sound of "po po po".Ive heard that running the afm on the i/c is better as it gets a reading of the air flow ,temp after the effects of the intercooler.But mainly i want a more aggressive noise for the cool factor .Mods are 14psi,pod,large fmic,safc on a rb25.

thats a 34 turbo right?is the price neg ? if so pm me

im up for 910