YO880

Hi Guys, i am looking for an R33 RB25DET engine fan, will also take teh clutch if you have it too.. I had one lined up, but it looks like the guy took my money and ran will pay for postage etc. please PM if you have one, i am in sydney

i pm'd you, i am still waiting for my fan, it has been over a month now since i payed you and so far i have nothing.

sold

do you still have the clutch fan? and where are you located?

please post a price or your thread will be deleted.

around $320 from nissan

thanks mate, sold to satanic, pending pickup

sorry, i got a full kit.

closed due to unregistered business post

so you are a business?

still available

and the full kit part number is 10101-17U26 RB25DET Gasket Kit - Engine Repair it contains: 1x Gasket goo (150g) 1x drain plug washer 1x cylinder head gasket 1x crankshaft rear oil seal 24x valve stem oil seal 1x rocker cover exhaust gasket 1x rocker cover intake gasket 2x camshaft oil seal 1x crankshaft oil seal 1x intake manifold collector gasket 1x manifold gasket 1x exhaust manifold gasket 1x oil strainer gasket 1x oil pump gasket 1x throttle chamber gasket 1x soeal o ring 1x AAC valve gasket

surely someone must have a S1 GTST??? please!!!

Hi Guys, I am building up a Series 1 RB25DET that i bought to put into my Datsun 240k. I am looking to buy the Nissan VRS kit or the full nissan kit (as i will eventually do an RB30DET conversion). I want to ring up nissan tomorrow to order a kit, but this is going to be difficult because i don't have a corresponding VIN number i can give them. does anybody know for sure what the nissan part numbers for both the VRS kit is and also the full kit for the Series 1 RB25DET (Manual) and if failing that, would anybody with a Series 1 GTST mind PM'ing me their VIN number so i can order the correct parts from nissan tommorrow? is there a difference between S1 and S2 kits? thanks Kent

i can answer my own question Rear O-ring - 16412F - the o-ring on the top of the injector Rear Insulator - 16603F - the insulator on the top of the injector Front seal - 16603G - the bottom insulator so i need the 16603G part according to FAST that is (i forgot i had it)

i picked up my 600cc nismo GTR injectors last night, i measured the injector inputs, and the only thing i could measure that was 10.5mm is the OD of the little o-ring on the injector feed, is this correct? I also tried placing an injector into the greddy rail, they seem to fit, but obviously i need the GTR insulator you mentioned i found the following in another post, is the rear insulator the correct part? R32 GTR / RB26DETT Rear O-ring - 16412F - $9.50 Rear Insulator - 16603F - $13.35 Front seal - 16603G - $5.35

yeah mate, that wouldn't be an issue, i work at st leonards if that helps

Item: brand new Nismo Fuel pressure regulator Location:Sydney Item Condition:New / Unused Reason for Selling: no longer needed - ordered the wrong thing I bought this Nismo Fuel pressure regulator from nengun (i have only just recieved it). Once it arrived, i realised that i now need to use an aftermarket fuel rail which does not accomodate this FPR Fits RB25DET and RB26DETT I will swap this for a new sard FPR (with a little cash adjustment in your favour) Price is $153 + postage

thanks bluefire, that is what i suspected Kent

i just noticed that the sard FPR seems to be remote mounted, but is there a way to remote mount the nismo one? maybe an adaptor or something? or am i just better selling/buying a proper one?

Hi Guys, Originally i purchased a greddy intake plenum for my rb25det to reduce the intercooler pipework etc. During this time i also purchased a nismo fuel pressure regulator (which is a direct fit onto the stock rail). Once i recieved the plenum i realised that it is a much better idea to go for an aftermarket fuel rail as well, as i need bigger injectors (top feed is cheaper) and the stock rail needs to be modded to fit anyways. I am looking at buying either a top feed greddy or HKS fuel rail, but neither of these have room to mount the fuel regulator on them (the ends seem to have screw fittings). It seems that you have to some how remotely mount the fuel pressure regulator. Can my nismo regulator be remotely mounted somehow? or will i need to sell it and buy some sort of different regulator? any help appreciated.

it seems that from what i can find out about the greddy rails from nengun and greenline, there are 2 versions.. one is an 10.5mm, which is meant for the std plenum i assume, and the 2nd is an 11mm one, for the greddy plenum.. does this measurement relate to the height of the rail from the plenum (some sites seem to refer to it as a diameter), ie. the height of the spacers that are supplied in the kit? phat, could you please measure the spacers in your kit for me? you got the 10.5mm one? i am going to use 600cc Nismo GTR injectors sorry for all the Q's!, i have checked through the documents i got with the plenum, but i can not read japanese and can only rely on what i can make out from the pictures. i am trying to get the instructions translated though

pm'd you here is a pic of the resistor pack on an R33 GTR Kent

i have a set of series 1 and a set of series 2 R33 ones if you interested.

Hi Guys I am looking for an R32/R33/R34 GTR Dropping resistor pack preferably with some of the loom let me know if you have one lying around, or know of anywhere that has them i am in sydney, but i will pay postage Thanks Kent