YO880

Hi Guys, i have an RB20DET loom for sale, i bought it originally to do an RB30DET conversion using an rb25de head, but i have since bought an rb25det engine and loom. The only issues that i know of, is that the AFM plug has been cut off (marked by yellow tape), it is also missing the coil pack sub loom thingy.. looking for $100 for it, i will post anywhere at cost pictures of the loom

I have an R33 engine fan here (for sale ) with 9 blades. are you sure 7 is right?

the 2 wire connector - Blue/white, light green - could this be connected to the power steering resvoir?

Thanks for that! does anybody have any photo's of the boost solenoid? (or better yet, one they can sell me , unfortunately the connector on this one has been ripped off, so i have no idea what it would look like the blue/White, light green connector is somewhere on the air filter side of the engine, it is a fair way down the loom, after the single wire termintated thingy, near the AFM cable from what i have found the series 2 AFM has 3 wires, the Series 1 had 4 i think. with regards to the last 5 wire connector at the end of this loom (picture number 3), should another loom fit into this? again this would be somewhere near the air filter i assume. what would the check light and consult signals be doing around here? wouldn't they be on the inside of the car generated by the ECU?

exactly, to get the standard RB25 injector rail to fit, you just need to reverse the regulator and remove the return solid fuel line (so that the return line starts at the back of the engine)

Hi Guys, i am wiring up my series 2 RB25DET and getting it ready to put in my 240K.. i have wired up most of the connections on the right hand side of the engine, but the left side is giving me some trouble. i would really appreciate it if anybody knows what these connections are? i need to connect them up i assume. I will try to describe it as best as i can (and provide colours); the wiring harness comes out of the firewall and then slits into 2, one going behind the engine and to the right hand side (under the manifold and to the front of the engine), and the other goes up the left side of the engine somewhere. Left hand side harness (from back to front): small brown box (some sort of control box or something) 7 wires - blue/red, blue/yellow, brown/white, brown, orange, black, purple connector coming off near brown box (it was cut on my loom) 2 wires - Black, green/black exhaust O2 sensor 3 wire connector - Orange/Blue, White/blue, Black/White -EDIT- this is the AFM sensor 2 wire connector - Blue/white, light green - maybe AC? although the AC compressor only seems to have a single wire connector heavy duty 5 wire connector - Blue/Red, green/orange, light blue, green/red, yellow i assume one of these are the AFM connector, however the AFM i have (for RB25DET) has 5 connectors, so it doesn't match any of these, so i may have a seres 1 AFM which could be different. There is also another block of connections with 5 connectors on it, right behind the engine (just near the firewall hole) it has the colours; light green/Black, black, light green/Red, Orange, blue/red any help will be greatly appreciated as always!

Fan and fan shroud still available

i don't think there is a huge weight difference between the RB and the L24.. it is a pretty heavy block! of course with a turbo, intercooler, bigger radiator etc.. (ie. all the supporting gear) of course it will make the car heavier

pics have been added. is an "XSpower" brand (as per the original post), it came from the states, quality seems to be pretty good, inside the flanges have all been rounded and are pretty smooth.. sold pending pickup

Hi Guys, i have for sale a brand new XSpower Stainless steel high mount T3 manifold with provisions for a 38mm wastegate. reason for sale is that it came with a turbo i bought, and i will be using the turbo low mounted. The original owner payed $300 for it not too long ago, and it comes with all the gaskets, nuts bolts, washers etc. I am looking for $250 for it, will post or pickup (northern beaches) SOLD pending pickup

how do these work in non-projector type lenses? would they be useless in a lens such as this http://www.narva.com.au/ForwardLighting_20.html

so you are bringing these wheels in as a business? please read the rules, and if you wish to advirtise then you need to contact someone about getting business trader status thread closed.

how many of these are you thinking of bringing in? are you going to be selling these regularly?

as per rules, you need to give an asking rpice, or your post will be removed

intercooler sold to brad pending transaction

i am afraid the part numbers don't match.. the R33 is one piece whereas teh R32 GTR is 2 pieces. not sure what the functional difference is, but the part numbers certainly don't match. Sorry Radiator Sold pending payment

i will check for you when i get in the office (i have FAST)

not unless it is the same as the R33 one shown. sorry it certainly seems to fit over the R32 GTR radiator properly, so i assumed they were

Pitures of the radiator fan and clutch (sorry it is a bit dirty), it is straight and undamaged

Hi Guys, I have the following items for sale as i no longer require them Prefer pickup in sydney (northern beaches), but smaller items can be posted (my post code is 2097 if you want to estimate postage) R33 GTST radiator Fan with clutch $90 R33 GTST radiator fan shroud $50 R32 GT-R std Fuel pump $110 items sold R33 GTST 370cc standard injectors $70 -SOLD R32 GT-R radiator - $50 - SOLD R32 GT-R Intercooler - $300 SOLD Kent

Thanks James, it was a pleaure doing business with you! Kent

anybody know of any other's (justjap havn't got back to me yet). so far elsewhere i have recieved a price of $400+ shipped to melbourne, not exactly reasonable. is there any other way to ship larger items to australia? what does nengen etc. use for shipping bodykits etc?

Hi Guys, does anyone have a container of parts shipping from japan anytime soon? a friend of mine in japan has won some stuff from yahoo austions for me and i am looking for a way to get it back to sydney. I can get my friend to send it to your agent etc. in japan, The items are a front grill and rear valance for a C110. I would prefer to use somebody reputable (ie. they do this fairly often), and in sydney/newcastle/wollongong etc. if possible (so that i can pick them up). measurements of the package are as follows: Length: 60 inches / 152 cm Width: 13 inches / 33 cm Height: 15 inches / 38 cm Girth: 53 inches / 134.5 cm anybody got any contacts etc? Thanks Kent

will you do the booster and master cylinder, shipped to sydney for $100?

I am still looking for a set too