webber

i know you said your firm on the gauges, can you do that price including freight? let me know and i will be buying those

i had an issue, where in one car it had a bosch fuel pump installed and where the cap on tod of the tank screws down to hold the pump, the rubber seal bit up there was leaking, very much the same thing, really crap economy, very familure smell of fuel... i just replaced the rubber bit & re tightened it up and hey presto... i also was noticing a small puddle when i filled that car right up... just a thought

Hey guys, i have an 040 in my r33 Racecar, i was running one of these in my road car with no drammas, but i am getting a miss from 4500 rmp on, when the throttle is wide open... i have replace the TPS, new splitfires and still i have this problem, i am running std ECU & STD boost while i have this problem, the car is fitted with a front mount and other than that & a 4" exhaust from the turbo, it is dead stock, (splitfire & irrideon plugs). anyway my question is should i be running a fuel pressure reg? is it possible to be supplying too much pressure? i don't tyhink so, but i am buying some new s15 480cc injectors this week, maybe the old injectors are the problem... i don't know as the car only just arrived from japan a few weeks ago

GIVE YOU $400

GET DESPERATE I WILL GIVE YOU $13K FOR IT, LET ME KNOW!!!

CAN YOU GET THESE RADIATORS WITH THE PROVISION FOR THE AUTO TRANSMISSION TO RUN THROUGH?

i would say a generic aftermarket one, hey just for interest, they have released the import skyline version of this pump so you can utilise that 10mm bolt hole everyone talks about not lining up.

BUMP, I WOULD LIKE THIS GONE THIS WEEK IF POSSIBLE

i have all the wiring etc that i picked out of a loome for a project i have, and the auto computer etc. so if anyone buys this and is interested pm me for more details.

THAT AND THE MOST OBVIOUS REASON IS THAT THEY HAVE A COMPLETELY DIFFERENT PLUG FOR THE ECU, IF ANYONE IS SERIOUS I WILL PAY FREIGHT...

Power FC is in used condition, few minor scratches. Has basic tune for front mount exhaust and pod. (hand controller got stolen last time i went to winton) Reson for selling - are upgrading to RB26 in race car. Negotiable on price for quick sale. PRICE DROPPED FROM $600 TO $550

yeah i have r34 front & rear, and also r33 front let me know via pm if your interested

WHEN YOU SAY A STD. STD GRILLE WON'T FIT DOES IT HAVE THE TOP CLIP HOLE BRACKET STILL? OR IS IT WAY OUT OF LINE FROM THE ORIGINAL TOP BRACKET POSITION? MY KAIRA FRONT BAR MOUNTS TO THOSE TOP LUGS...

WILL THIS SUIT R34 POWER FC? I TRIED A MATES IN MY R34 ONE AND IT JUST HALTS ON THE SAME SCREEN

AS ABOVE LOOKING FOR EITHER R34 POWER FC OR MANUAL ECU, HAVE RECENTLY INSTALLED AN AUTO NEO INTO MY MANUAL R33 AND NEED ONE OF THESE ASAP

hey mate keen give you $250, let me know either way will put in money tonight

HEY GUYS I HAD AN R34 NEO AUTO MOTOR LYING AROUND, SO I RETIRED MY S1.5 RB25 INTO A RACECAR WHERE IT BELONGS. I SEPERATED THE AUTO WIRING OUT OF THE LOOME AND PISSED OFF THE AUTO AND USED MY R33 MANUAL GEARBOX. I THEN WIRED THE COMPTER INTO MY INTERRIOR LOOME AND WIRED IN THE INDICATOR FOR THE LEFT HAND SIDE AND A FEW OTHER THINGS THAT NEEDED ATTENTION. BUT I AM RIDDLED WITH ONE PROBLEM... I CAN'T SEEM TO GET MY SPEEDO TO WORK. TACHO, OIL PRESSURE ETC ALL WORK FINE, I HAVE LOOKED OVER IT AND AS FAR AS I CAN SEE I HAVE IT WIRED IN RIGHT. IS THERE ANY MAJOR DIFFERENCE BETWEEN R33 & R34 SPEEDO'S? so r34 neo with r33 manual box and speed sensor, but speedo isn't working. IT ALSO HESISTATES TO START USING THE STD. AUTO COMPUTER, BUT AS SOON AS I PLUG IN MY POWER FC IT STARTS FIRST HINT OF A TURN OF THE KEY. (I'M NOT USING THE POWER FC ATM AS I DON'T HAVE A HAND CONTROLLER FOR IT AND IT NEEDS TUNING). Is this because manual fuels up more on start-up? PLEASE PM ANY SUGGESTIONS?

When you put in your Neo did you have any problems with your speedo signal? mine dosn't operate and i am using the R33 Gearbox with it's speed sensor. any ideas?

Start bidding on mine then... lol.. up for grabs... i am thinking about getting a mould made from it...

my mate Gary used to race this car around Winton it goes well for an auto.. looks hella better man now, you wouldn't be making anything off selling it.. good luck to the buyer..

how much for the lot? interested...

HOW MUCH FOR THE FRONT DIFF AND FRONT DRIVESHAFTS (WITH HUBS)?

pm me ur bank details, i'll give you $20 and pay frt.

Is This still for sale? say you'll take $200 and i will buy it... Cheers

where you located? let me know asap thanks