webber

Just Cleared my inbox. Cheers

$1300! Last Bump Before i stick it in the cupboard.

Any Offers?

Anyone?

I Thought: R33 GTR, S2 Stagea & R34 GTT GT4, GTR Coil-Overs are the same 'fitment', from memory R32 GTR & GTS-4 rear are a bit shorter in overall length. They all have the Clevis rear mount: R33 GTS-T, S1 Stagea, R32 GTS & GTS-T R34 GT All have the Eye-type rear mount. With very simular front and rear strut lengths. Also The fronts used on the Clevis type are a fair bit shorter than those fittes to R33 GTS-T, S1 Stagea, R32 GTS & GTS-T R34 GT (from memory roughly a good 50mm) and when fitted are stupidly low at full height with no adjustment left. This is because their mounting point is physically higher on the front hub assembly to clear a front drive shaft (except the R34 GTT, but it shares the same geometry as GTR in the respect that is also shares the higher mounting point) (i am sure the R34 GT has the lower R33 Style (front) as it definatly has the eye type rear; but i am happy to be corrected). Many combinations interchange, but you notice minute differences in length and adjustability between different models and brands of coilovers. I have measurements of different brands & what models they were made for from most the sets i have owned over the years. BTW SOrry for the Hi-Jack

bump!

Anyone?

BUMP!! R34 GTT Power FC & Z32 $1400!!

Will Throw in a used, working Z32 AFM if sold this week. Cheers

Hey Guys, I have an R34 GTT Apexi Power FC ECU was purchased to go into one of my R34's i was planing to put a bigger turbo on etc - but has only been sitting in place with the default tune, and i have lost interest in upgrading the car. Is in excellent condition with very little wear on any of it. Have lost the box, but may still have an instruction manual etc. I am not pressured to sell, And everytime i sell a power FC i always end up spending another $500 more than i sold it for to get another when i need one. So I may even just stick it away in the cupboard. Price is $1400 Free Registered Express Post to Anywhere in AUS! No low balling; Don't like the price go buy one from "your mate that just got one for $900 " because i just don't give a f**k New they are THIS If you can Get one.

can't send you a pm mate. Cheers

Sold to Randy... Cheers Mate

bump!

Z32 ECU modded for S2 R33 GTS-T With RB25 ECU. Can make additional mods to suit S1 TPS. Type 2 board in Z32 ECU allows you to retain VCT with full real-time tunability. Only has base RB25DET maps. want $450 including post to anywhere in Australia. (registered Express) Does not include cable. Prefer Paypal Payment, First in first served. - Will not hold for anyone. - Can have in Post today!

PM Sent

how much for the Ad08's? Cheers

btw i have a fair few connectors (bulk), i have a huge list i have identified from most of the skyline looms i have. If i ever get motivated i will update the list i have on there. Cheers Webber

some cheap ar$e owned it by the looks... lol probably had a tranny from a Z31 or something.. lol. who would know?

i still reakon, it is a short type fs5w71 bolted to an RB20 bell housing. same crap as they are talkign about below (but obviously dif. combination of boxes, most of the bell housings are the same length, but the main shafts vary in length after the sandwich plate, and the rear of the box can be longer & shorter depending on what it is or in, sometimes you have to change the input shaft or the front bearing plate that bolts to tht bell housing. you get what i am saying http://club-s12.org/v3/index.php?topic=12333.0

i am no expert but it looks like it is an RB20 bellhousing bolted onto earlier fs5c71 box... ?? ohh and it looks like you could turn that mount around???

Mate, can you send that connote number? cheers

for anyone interested genuine powersteering line p/n was 49541-AA100 and even in Aus was only around $40 but 4-5 weeks from Japan.

As above need the following: R34 GTT Reverse lights. R34 GTT power steering rack ahrd line as in pic: and the plug that goes from the front indicators and clips into the actual indicator housings (where bulbs plug in).

Thanks guys, i will work through what is a definite tonight and shorten the list. I think i have found most of it now. Cheers

List of parts i need is: glovebox door & housing manual surround manual steering wheel (or R33 S2 wheel) caster arms front bar reo housings for indicators, (ie. plug bit that holds globes. Reverse lights Nismo side skirts (must be genuine and prefer white) front RH gaurd suit 2-door in white I will add anymore as i can think of them, i have a few bits in the pipeline, but see what happens.