Race__24

I think it was mostly heat soak from not running a fan or res. With both of those things in place you'll increase the thermal capacity of the system. Particularly if you can get the res somewhere reasonably cool. I was also running a Hi-flow turbo which probably wasn't to efficient. My tuner recommended going back to a front mount and there was definitely an improvement.

It's also worth thinking how you want to wire it in. You don't want to drive around with a blown fuse and the pump not running.

I just ran standard premix coolant

The kit was based on this one which is a 600hp kit http://www.frozenboost.com/liquid-air-intercooler/water-to-air-intercooler-p-1006.html?osCsid=4a82cfdcc8d2c9a5bfe18b516f7c3663 Except I have a Bosch pump and a type 118 heat exchanger. I didn't have a resi. I wasn't running a thermo on it either. Probably with the resi and thermo it would have been much better. The intercooler was always cool to the touch. I tried to fit mine where you are planning to but there was now way it was going to fit. The intercooler would fit but the piping takes up much more room than you would think.

I was running a water to air for a few years. Was excellent with the stock turbo. Throttle response was amazing and fits in without having to cut the reo. When I went to a bigger turbo it struggled. I still have the kit if you are interested.

Located Wynn Vale, South Australia

Sorry mate, I don't come on here often. Both are still available.

I have an Emanage Ultimate with loom for sale. It was working fine when removed, I've just upgraded to a Haltech. I have a used standard loom and an unused s15 loom. There are also the plugs to wire in a wideband and MAP sensor. I'm looking for $350 with either loom. I also have a Emanage Blue, the unit works fine, it has a few dings and scratches. It has the special cable and software to tune it on a laptop. It will come with the ignition and injector loom. I'm wanting $150 for this one.

Emanage Ultimate with loom etc. I also have an unused plug and play loom for a s15. Looking for $350 for the emanage and either loom.

What is the part number for the pistons?

How much for the manual conversion?

I'm still after these if anyone has some

There are aftermarket maxima struts on ebay for $30

You want to use fibreglass resin mixed with micro-beads to fill gaps in fibreglass. Then sand back smooth

Location?

Sold

As title says, I'm after a set of stock springs, preferably in Adelaide.

I've got 2 engines to sell. Both need a rebuild as they have compression issues, one is possibly missing a ring land. They are in various states of assembly but both still have the bottom ends intact with the heads on. I would prefer to sell them whole as I want them gone. I will part them if needed. Located in Gawler SA

Yeah, still for sale

No, one engine is a series 2 RB25DET the other a series 1.

I've got 2 engines to sell. Both need a rebuild as they have compression issues, one is possibly missing a ring land. They are in various states of assembly but both still have the bottom ends intact with the heads on. I would prefer to sell them whole as I want them gone. I will part them if needed. Located in Gawler SA

Do you have the Air conditioning condenser?

sold

I've got a set of Splitfires to suit a series 1.5 and 2 RB25DET. They came out of my series one Stagea. I'm upgrading to a neo so I don't need these any more. I'm looking for $250 Located in Adelaide

I have a set of Splitfires to suit a series 1.5 and 2 RB25DET. Looking for $250