Jump to content
SAU Community

GTRsean

Members
  • Posts

    3,675
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    100%

Everything posted by GTRsean

  1. o2 sensor holes are different between 32 and 33, you need adapter nuts basically.
  2. Femno would know about that, it happened to him. Something to do with oil pump in transfer case pumping oil into g box side due to a seal not sealing basically. Needs to be pulled apart to fix.
  3. Might have been me! ANS ###. Was with a soarer. Didn't see ya. But spotted a light blue 32GTS-T, kit with open wastegate, sounded cool!
  4. Had a VN 1988 v6 manual(good fun tank slapper). Did the job, tip though, make sure coolant hoses and heater hoses are replaced! If you had less than half a tank going around a round about motor would die for a sec cos the tank has no baffles, the little things!
  5. Owned mine 3 years so far and mines still yet to go!!
  6. Stock airbox I put in mine is flowing 340kws worth of air atm with no mods to the box yet, or any ducting to it!!
  7. Car sold pending full payment. Deposit taken.
  8. Good luck with sale mate.
  9. And I thought it mainly happened in Tassie (I'm from there). See it all the time. Derro's
  10. Is this what it looks like? You can have it for $30 It's wider than Gtr one.
  11. on 17x9's I've had 235/45, 245/40, 255/40, 265/40. Now run 18x10's all round on the 32 with 255/35 ATM.
  12. 255/40 r17 tyre are the best match and won't throw your speedo out too much. 245/40 will give you a thinner side wall and lower your car, also make your speedo 10k under.
  13. No thanks. If I was into bikes and knew what a wr400 (400cc bike) is I'd let you know. Cheers, Sean
  14. year model: 1990 BNR32GTR Colour: black pearl VIN:6U9000BNR32006987 ENG No.:RB26009105A Condition: as is, inspection welcome Location: Richmond Western Sydney Why selling: Was going to build it up as another project but ran out of cash keeping my car on road, and can't keep vehicle at current location. Would suit someone who's after a project car, or parts car. Can it be registered? Yes. The vehicle has vin plate and engineering certificate. Once vehicle can be made ready for a blue slip, it can then be registered. Has a small amount of rust forward of RH suspension tower (shown in pic). Body is straight, paint is fair but clear is worn on roof. Suspension is bilstein with RSR springs Engine runs fine and was running before it was pulled apart, plugs all even and show no oil etc. The vehicle needs the following parts: GTR wing Clutch etc Gearbox Grill fuel pump injectors rear sway bar instrument cluster (last odo was 82552km 20/12/05) alternator front seats rear seat (GTS-T rear seat in car atm) center gauge console surround injector resistor pack with plug front hard brake lines to master cylinder (car didn't have ABS unit installed) steering column lock barrel intercooler and piping BOV's Asking for $8500. PM or reply to post Cheers
  15. What he said. 295RWKW yeeeeeeeeeeeeeeeeeeeeehaaaaaaaaaaaaaaaaaaaa!!!
  16. He means centre of wheel to top of wheel arch height is 350mm.
  17. Theo came down fron QLD with his 32GTR drag car (awsome) it was at BD4's for a little while parked out side. He'll be there. He's aiming for low 8's. I would but no cash.
  18. you can cook chips in it!
  19. Same as before except changed worn r33n1's with r33n1's with stock Gtr rear housings, which is smaller than N1 housings. R33 N1 turbos (bush bearing) 720cc injectors Nismo pump ex cam gear split fires blah, blah 268 RWKW @1.1Bar 295.49 RWKW @1.4Bar
  20. Spotu white r33 Gts-t with mesh style wheels on Great Western. Goes ok with stock(boosted) turbo and auto.
  21. shims need adjustment on valves? To rule out injectors pull off one connector at a time on each of the injectors while engine is running.
  22. Thanks very much for that. You guys rock!
  23. Videospace, were they done with throttle open? And did oil get put in cyl to see if it was piston, rings etc? 32gtr rb26dett limits from memory are: 171 new 160 avg 125 limit no more than 14psi variance,(146,160)
  24. If you want a proper check, get the workshop to do a leak down check. It'll tell you more about condition of engine than a normal comp test.
×
×
  • Create New...