Jump to content
SAU Community

GTRsean

Members
 View Profile  See their activity

  • Posts

    3,675

  • Joined

  • Last visited

  • Days Won

    1

  • Feedback

    100%

 Content Type 

Everything posted by GTRsean

  1. GTRsean
    Hey Bobby, I'll work it out the same as Sloane's build, most likely be around 9.0:1. Block is getting decked, and I'm using non valve relief pistons. Will also use a suitable headgasket thickness depending on measured piston crown to cylinder head quench pad clearance for squish. I have asked the engine machinist to bore and hone the block with a torque plate and set piston to bore clearance at 2.5 thou. Others have run tighter with tomei's but I have settled on 2.5 thou.
  2. GTRsean
    Yep another one myself, and this will be the 3rd RB26 I've built. They are getting madder and madder haha! I'm still hooked on GTR's!!!!, I'm sure you'll get one again!
  3. GTRsean
    Beautiful day for it, and I'm already here!!!!
  4. GTRsean
    Don't forget guys, texi is on tomorrow and wind your clocks forward an hour if they don't automatically See you all there!!!
  5. GTRsean
    It's not that loud.
  6. GTRsean
    We can fit you in
  7. GTRsean
    I'm dead serious here Otherwise I'll have a non turbo GTR to tow around...
  8. GTRsean
    True...I'll ask.
  9. GTRsean
    PM sent.
  10. GTRsean
    Buy kit now, rebuild later
  11. GTRsean
    I ordered this part number and got turbine housings that would suit a silvia SR...It wasn't the compact rear flange mount, so $660 wasted... I'm on the hunt again for rear housings...
  12. GTRsean
    bumpage
  13. GTRsean
    Yummy!! So clean
  14. GTRsean
    Saving the bottom end as a spare for now.
  15. GTRsean
    Thanks! Shit is getting real!!!
  16. GTRsean
    True, might just keep it for my spare bottom end...
  17. GTRsean
    That is on the way too!! Nismo snorkel from RHD
  18. GTRsean
    For sale nismo G Max twin plate clutch and flywheel. Rated at 600HP Stock pedal feel. Great street clutch, and it is basically the older version of the coppermix. Condition: used I used this clutch for 1500km running 300WKW, only replacing it due to a full monty engine build and using a coppermix twin. Bought from SSS. Before I fitted it I bought 2 new genuine clutch discs at $400 each to replace the old one's. I have done only one launch on it, never got to use it at drags, track etc, so thats a bonus for whoever buys it!!! Selling for $800 neg Will include throwout bearing. This will only fit R34GTR or GTR's with a getrag 6 speed. PM for details Pickup from Richmond, Western Sydney NSW or I can arrange courier at extra cost.
  19. GTRsean
    Yep.... The -9's are sold... So...Stage 2 has begun Consisting of: tomei 2.8 stroker GTX2860 turbos, -5 turbine housings. HPI dump pipes new nismo Coppermix twin plate clutch and flywheel kit spec c block partial grout filled decked, torque plate honed etc.. port and clean up head, tomei type b springs. Ross trigger balancer and kit And lots of little cool stuff.... such as nismo style tail lights I aim to get this done and all on the road for SAU nats in November!!! Pulled engine out today. Already have a block getting prepped to save time.
  20. GTRsean
    Bring on the parts!!!!
  21. GTRsean
    Was my 'noob' fault!!! had the camera in normal mode, GF's camera D7000.
  22. GTRsean
    That would be $6369 total....you forgot the $70 postage That ebay guy has got a few negative feedbacks too.....
  23. GTRsean
    You know you want it! I'm losing money on this
  24. GTRsean
    For sale is a Tomei 2.8 stroker kit. Condition: Brand new, parts bags are unopened, complete kit, only opened box to take pics. To suit: GTR32-34 Reason for sale: Already have a Tomei 2.8 stroker kit to use so this one has to go to continue my build. Kit has: 1xTomei Forged steel stroker crank, approx 20kg, 77.3mm stroke (4mm extra stroke than RB26 crank) 6xTomei forged pistons, pins, circlips and rings, 86.5mm size, non cooling channel with valve reliefs in crowns for high lift cams, V cam etc. 6xTomei forged h beam rods with ARP L19 rod bolts and lube. 6xOil squirter spacer washers Stickers, instructions and tomei badge. How much: $6000 ono, It cost me $6750 to get in. (Prefer not to separate) PM if interested. No time wasters/low ballers please. I know you can get a nitto, spool, brian crower etc kit cheaper...I don't care. Took a few months to get from Tomei Japan. Get in quick!! Any other details I may have missed will be on the tomei site. Pick up prefered, or I can arrange a courier at extra cost. Location: Richmond, Sydnew NSW PM if interested.
  25. GTRsean
    1 million dollars.....holds pinky to side of mouth....
×
×
  • Create New...