Topaz

idle sensor.....I have no idea what or where it is though.

Outrun 2006: Coast To Coast GTA:LCS Burnout Legends Lumines THPS: Underground 2 Remix Outrun is awesome, Burnout gets a bit annoying, GTA is boring as hell, Lumines I just got, Tony Hawks is boring. I want to get Ridge Racer, been told its rather good and waiting on GT4 Mobile, oh yeah. I am yet to downgrade to 1.5 for homebrew, but I have been looking into it recently.

GTR engine performance parts, go for your life.... GTR cosmetic parts may increase performance on paper, on the street? No!, on a track? Unnoticably yes! GTSt's should stay GTSt's on the outside

You can get an FPR is you want, but its not a necessity, at ~$125 I thought it was a good idea, the only thing I am not replcing to do with fuel is the fuel rail. I remembered a few weeks ago someone posted about having problems with the FPR. I found some specs on the NISMO FPR, which are. Adjustable to 10Ka/L/H with a 250m/sec Flow Rate. I have no idea what standard is though.

Fuel Pressure Regulator Kits. Have a read, see if you may need one. With those mods, injectors will be bottlenecking more horsepower and performance I'd say.

Ooohhhhh yeeeaaaaah! Thats 15-20kW I am forgetting right there.

I have just ordered a NISMO one (plus FPR, 600cc injectors and t-belt) from Perfect Run Should be quite good, yess, mmm Going by SK's maths (for me) 600cc injectors = 3,600cc's per hour = 216L per hour 4.6L per minute fuel pump = 276L per hour yada, yada, yada. About 500-510hp :D

GTR rear fenders? thats a bit extreme, but whatever Wannabe GTR's have the bonnet, grille, bar and spoiler which undoubtedly make it go faster

Hello, I am about to buy some new injectors for my GTR and its said to use a dropping resistor to fit them. Anyone know what that is? I also found out from this site (down between the second and third 'quote') that its something to do with Pulse Width Modulation! The Nissan part number is 22698-05U10. If I need one, hopefully they aren't too expensive.

Nice review, I was looking at getting genuine Nismo front and rear strut braces for my GTR, which I guess aren't bad at $382ea delivered. Did you just bolt it on and that was it?, I thought you had to lift the front wheels off the ground to do it 'properly'.

lol at the doods in backwards caps and basketball singlets at the unvieling

I bought mine in Perth to save on the wait of importing and the possible high cost of compliance and chance of rebuilding. As said above get one you can see and drive and has possibly had a rebuild. Mine foretunately had had a rebuild 6,000kms before I bought it and the owner showed me the $7,500 worth of receipts for it. As you probably know already a late '93 (August) and onwards will quite likely be a V-Spec model GTR. Good luck with the search and as you have a basher you don't need to jump right in.

Woohoo, I just added my space up again and its 1004GB

They won't need to colour match because I have a Gun Metal R32 which is Nissans KH2 colour. Just need a good job done, Hi-Lite sounds good. Just got their number from White Pages. Thanks Steve.

I am looking for a repair place too, I need some rust and a small dint repaired on my rear arch. Been told Damge Control in Maddington is good, but friggin MADDINGTON! , Anywhere else NoR?

188kW is about 252hp get it right mate Good luck with the sale.

lol, Awww man that was classic, never seen this thread before, get to the 3rd post and BAM! its all over

Whats a recommended package to buy? Would it be shocks, springs and stablisers? What about Polyulethane(sp?) or Nolethane(sp?) bushes, are they included with any of it? cheers

Damn, just went through a few pages here and it seems theres a few R32 GTR's going lately , doesnt make me feel very good with loudly ticking injectors (no idea why they are so loud) and a few engine heartbeat skips every now and then. I have 228rwkw from my GTR but it did have a rebuild about 25,000kms ago so hopefully I am not in for a rebuild myself soon. Good luck with all the rebuilds, this is a good read for future reference

Combustion = Air/Fuel mix, if you are pushing more air into the plenum the computer will be all like, ZE MOR FUELZ YAR!

Something with a long duration like 264 in/ex and a 10.5mm lift. Now you just need a brand. Tomei, HKS etc...

Your all stoopid, they are inside the engine on Pulsars. Sorry mate you need a rebuild.

That car is awesome, You can definately see how these American'ts have copied the basic body structure with those awesome super wide arches

I dunno, I must have heard that they were called Dolphin Face Stags somewhere

Those 2 cars are some of the cleanest I've ever seen, but they really need to leave the 70's and get some decent rims.