obe353

Managed to basically knock myself out with the boot falling on my head thanks to dead struts. Does anyone know of the part number or where to get Universal/OEM struts? I have a R33 SEDAN (Apparently they a different to coupe?) Thanks!

Hi, Tody I was swapping my diff out on my S1 R33 Sedan. When removing the ABS sensor wire from the front of the diff housing, I traced it back to what looks like an unplugged plug! The previous owner fitted a HICAS lock bar, and removed the HICAS Where is this Plug from the ABD Sensor meant to connect to? Thanks

Anyone able to shed some light on this? I pulled it out of the housing today, and still no markings. The closest thing I think it maybe is a Cusco RS But I'm still not 100% sure as the internals through the holes look different. I've asked on a heap of forums and it's become quite a mystery :S

They feel locked. they turn together. I'm starting to think It might be a Cusco RS Mechanical?

Hmm.. VERY Interesting! I rotated and there was no inspection hole to see if there is a 1 way or 2 way peg. I pretty much cam to the conclusion it was not mechanical.. Hope these pics help...

Can confirm the crown is 4.11 gear ratio

Opened my housing today.. Anyone able to tell me what centre this is and what the 7.0 on the crown means? Thanks

I'm glad you made sense of what I was trying to say! I'm assuming your standard Cusco/kaaz/nismo all require factory half shafts?

I need some advice here.. I have an R33 ABS Diff housing which I want to fit a 2 way into. There seems to be a shortage of These housing with 2 ways already in them.. So I need to find a centre that will work with the ABS half Shafts Yet it's quite hard to find a listing of the different threads on the half shafts. I am aware that you can swap center + half shafts from 5 bolt to 6 bolt etc but this is a bath I don't want to go Do the No ABS R33 Half Shafts fit ABS centre's and visa versa? Was the R33 the only R200 to come out with a 5 stud half shaft? Thanks

Hmmm.. I think they may not be.. According to this post, it looks like RB20 is -10 / RB26 is -12 / RB25 is ?? http://www.skylinesaustralia.com/forums/topic/396791-rocker-cover-breathers-dash-10-size/page-2

Hi, I'm trying to work out what size hose I need th go from the elbow on the rocker cover to my catch can. One I know the elbow size, I can figure out the hose size which means I can then work out the fitting size for my catch can. I don't want to have size up and size down fittings. Can take a picture if you don't know what i'm talking about Thanks

I have searched for hours on this topic and have ended up more confused then ever. I'm trying to find a set of 17's for my R33 GTST Yet I can not figure out how wide I can go on the front with out scrubbing The car is Lowered Stock Brakes Any advice? Thanks