B0oStEr

Bump

Bump

^

How much wear is left on the discs?

WTB Front bar, side skirts and rear bar for R32 4door. I have good factory front and rear bars Aftermarket front bar is needed to accommodate FMIC. Side skirts can be factory or aftermarket. I only need a rear bar or pods if needed to visually match the side skirts Phone 0266 251 365 or PM. me

I saw a pair of these in for sale last week but they had sold before I saw it. I'd prefer genuine ones but fg would do. Cheers.

I'm not sure what these go for but if you have one and think it's cheap enough let me know. Thanks.

I'm after a turbo from a late 2000, early 2001 GTT that has Garrett written on the comp. cover as an upgrade for my RB20.

So can anyone confirm whether the GTT calipers and rotors are a straight swap for the R32?

Combinations of various compressor housings and 1 resin and 2 different alloy impellers as well as the garrett turbo. There would be six easy. Do you know if the garrett turbo has a steel exhaust wheel as I've read? If it has and is BB as you say I think it would be a good upgrade for the RB20. I want one.

R30 front bar??? I think I must be in the wrong thread... or everyone else is.

This should be in WTB thread. Mate That pic in your avatar should give you a clue where to look. I saw it this morning when I ran 'r32 front bar vertex' on a google image search $350 for skirts, $450ea for front and rear bars. Must be fg copies for that price as I think genuine Vertex kits cost a fair bit more

What brand are the tyres? I assume they are 225/45/17. What condition are the other three?

What year model is it from? Is it ball bearing?

I had a go at doing this a while ago but found that even though I got the door trim back on over the speaker, the speaker surround hit inside the top of the factory grilles when I cranked it. This was because my speakers had a long excursion. A lot of other speakers wouldn't have that problem though. One other thing that almost caught me out was the power window mechanism. A quadrant gear enters the space where the speaker magnet goes as the window is would up. I didn't see it when the window was right down and had already cut a baffle out when I checked to see if the magnet cleared as I wound the window up. I had to cut a new baffle with the speaker mounted lower and further forward so it would clear it.

I read in a SAU thread there are 6 different turbos for the r34s. Do you have more pics of the one that says garrett on the comp housing? Do you know if it's ball bearing? I read it might not be.

I'm fitting my Hybrid cooler to my R32 GTSt. It looks as though the stock bar is not going to allow much air to flow through it. I thought I might cut out where the numberplate goes and maybe cut 'nostrils' like the GTR. To do these things I'll have to cut the bar support up which would weaken it or could I get a GTR bar support. Will the GTR bar support fit behind the GTSt bar? Will the holes line up? Does anyone have pics of the GTR bar support so I can compare them? Do you have pics of any front bar mods? Where can I buy a GTR support and a pair of 'nostrils'? Thanks.

How many kms has it done? Has it run much boost? Are the water and oil lines available?

Is it a manual? How many Kms?

Would water lines from an rb25 fit and where do they connect?

Have you still got the exhaust? Pics to [email protected]

8 x $90 = Hmmm, Wonder what they'd want for a pair of complete calipers. I think I'll get a good second hand set. BTW What is the pad no. for the R33GTSt? Is it the same as the R32?

Braided lines hmm sounds like they're mechanical gauges. Couldn't find Tomoni on Google. Are they Tomei?

Which gauges and how many? Any chance of some pics?

A mate bought a TamK.O. copy of the Greddy type S off ebay and bought it to me to fit. I thought it looked like a really cheap copy but I had a look at a genuine Greddy one at Autobarn and they appear identical right down to the gasket that comes with it. It was about a third of the price of the Greddy one. It wasn't very loud with the stock air filter but is pretty loud with a pod. It flutters a bit backing off from low boost but has a solid Pssshtt from higher boost. The spring adjustment changes the sound quite a bit.