Jump to content
SAU Community

boomtheroom

Members
 View Profile  See their activity

  • Posts

    238

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by boomtheroom

  1. boomtheroom
    i get error code 18 (pressure switch) when i first turn on the car but dunno where that switch is
  2. boomtheroom
    i notice when i turn on the car the fluid level in the boot doesnt move at all,isnt the level meant to drop?
  3. boomtheroom
    got any pics of where the pressure control switch is in the 32 gtr?
  4. boomtheroom
    did u fix ur problem if so what was it?
  5. boomtheroom
    anyone?
  6. boomtheroom
    anyone work out how to fix the error code 18 yet?
  7. boomtheroom
    thanks,do u know if anyone makes a aftermarket,replacment for the gtr same cc rating?
  8. boomtheroom
    also how do u get the injectors off the rail without petrol comming out i removed one after running the car with the fuel pump off till it died,pulled it out and flowed out all over the place,any special methods?
  9. boomtheroom
    when they leak from the body of the injector and not the o rings ,where do they normally leak from ,anyone foud out?
  10. boomtheroom
    i have a couple of leaking ones in my 32 gtr,seem to be quite common in the 32,s are the 34 gtr injectors built any better?
  11. boomtheroom
    what about 550 cc nismo injectors?
  12. boomtheroom
    what the biggest cc rating u can replace the stock r32 gtr injectors with ,without aftermarket ecu ,and running too rich?
  13. boomtheroom
    have just removed my autometer air fuel ratio gauge from my gtst and put it in my gtr but ist not reading anything ,was connected to the white wire on the gtst,and the gtr i connected to the same wire but it doesnt fluctuate like it should just sits there and doesnt move ,does the gtr use different o2 sensors than the gtst, if so where do i connect the signal wire from the gauge to, in the gtr?
  14. boomtheroom
    anyone had this error and fixed it without replacing parts?
  15. boomtheroom
    anyone willing to do a write up with pictures of points of interest, step by step of the entire procedure bleeding the altessa system?
  16. boomtheroom
    how do u bleed it exactly???
  17. boomtheroom
    so what was actually wrong? just diffferent size tyres?
  18. boomtheroom
    so what was the problem? im getting the 18 flashes code
  19. boomtheroom
    i got everything apart but how do i get this part off to put the new boot on?
  20. boomtheroom
    btw are the hicas computers exactly the same in athe r32 gtr and gtst,s?
  21. boomtheroom
    ok found the problem, the solonoid the opens to control the powersteer isnt opening at low speed,applied 12v to it and it works perfectly,so its either not connected,to the controller or the controller is buggered, does the p/s run off the hicas computer as well or a seperate controller?
  22. boomtheroom
    ok , lock bar in back all power steer lines up front have been removed, and smaller power steering pump is in old ones place ,any ideas as 2 why the steering would b so hard? anyone done this type of conversion got any ideas?
  23. boomtheroom
    also do u know the size of the split pins that i need to get to replace in front of the hub nut and on the rack arms?
  24. boomtheroom
    ive got a impact wrench will that do?
  25. boomtheroom
    how do u lock the hub when u undo or tighten the bolt
×
×
  • Create New...