Jordy32

Fresh silver could look good? In saying that, a fresh coat of white would look good too!

Hey mate hope you're well I got them from GKTech Here's a link for you - http://www.gktech.com/index.php/products/#26 I used the 3" ones throughout my exhaust even though it says "dump pipe to front pipe" and worked a treat! (http://www.gktech.com/index.php/3-multi-layer-stainless-steel-dump-to-front-pipe-exhaust-gasket.html)

Thanks guys Planning on raising the car a bit and flattening out the camber over the next week, there is absolutely no grip in the rear... I spin the wheels constantly and well to be honest it's too low for my area, my lip has copped a beating since i'm not used to driving with it this low any more haha Also - Has anyone had any luck with the Whiteline swaybars? people say they don't fit, others say they do? not really sure what to do!

Thanks! I've been looking to change it up a little recently, however comments like this make me consider keeping them

That's me! haha thanks I know you're telling me, i almost passed out when i saw the pictures.. How's your car going?

Yeah man, it's a shame.. I'm just glad no damage was done.. Well, the car is registered, woke up this morning and dropped the run in oil and replaced with some fresh penrite and then took it for a spin today just around my local area and wow it's fast, well much faster than it was and the response is incredible, I'm a very happy chap! I'm also really happy with the exhaust, i picked it up for $350 or so from a guy on facebook, it was an HKS 3" mild steel system with 2 mufflers and it sounds great! not overly loud with a really nice note, can't wait to open it up and get above 4k rpm.. lol

it says toyota on it haha how strange

Covers look great Car is clean man, hope all goes well with the new engine!

I read the heading and I wasn't convinced, but the renders look aggressive, i like it!

Thanks guys can't wait to see how it goes Bringing it home while i save for rego and recoup from the costs lately to do a few other things to tidy her all up first Plans are install GTR rear seats and sound deadening, fix up speaker wiring, conduit hoses and wiring in engine bay to clean things up and give it a nice wash and detail for the first time in a loooong time

Woke up nice and early to drop the car at the tuners, here's a sneaky pic at Maccas while we were eating lots of hash browns So i dropped the car at JEZ, it was absolutely freezing , we got the car off the trailer and pushed it into his shop. We had a lovely chat about cars, parts and other car related things, i pat his cat and left. A little while later i received a call letting me know that there was an issue, whoever put my engine together had put the exhaust cam on 10 teeth out of line and that he would be fixing it.. I called the mechanic who built my engine who's "PHONE DIED" just after i said what had happened, who now won't reply to any of my messages or calls, f**king moron.. - ANYWAY Car got on the dyno! Car was run in and tuned on the dyno and after a few heat cycles we came to a final result! Low Boost (12psi) - 234.2kw High Boost (18psi) - 252.8kw I'm glad to have reached my goal for the car and can't wait to drive it, the curve looks like it will be very Mod List for the car is as follows to this date Engine - RB25DET (OEM Rebuild Head and Block) - Tomei Poncams - ACL race bearings - ARP head studs Intake - Greddy Plenum - Greddy Throttle Body adaptor - Greddy Intercooler - Apexi Pod Filter Exhaust - OEM Cast manifold - OEM Heatshields - 3" Stainless dump pipe, modified with a flex joint fitted - HKS 3" Mild Steet exhaust, (claimed to be an option for a GTR - Got it for an absolute bargain!) Modified to fit GTST (hangers) - Catco High Flow Catalytic converter - Nissan OEM and FRUSH gaskets Turbo - HKS GTRS Turbine - HKS Wastegate Actuator Fuel - Tomei Fuel Pressure Regulator - Aeroflow Fuel Pressure Gauge - Aeroflow Lines and fittings (400 Series) - Plazmaman Fuel Rail - Bosch 725cc Injectors (top feed) Electronics - Z32 Air Flow meter - Tomei Z32 Air Flow Meter Plug - Apexi Power FC ECU - Greddy OLED boost controller - Yashio Factory Water Temp Gauge - R32 GTR gauge cluster - Powered by max multi gauge - Innovate Lambda gauge Thanks

Orange oil, eucalyptus oil, clay bar, wd40 and a razor blade, even some petrol just make sure you clean up what you put on your windscreen

If we ask nicely enough can we get some pictures?

Nice car, love the colour!! Dyno sheet looks good, looks like it'd be quite enjoyable to drive! - Keep us updated!

Beautiful wheels Terry Free bump for sales post

Hey mate, car is looking great! always nice to see a clean R33 Good to see you working on and enjoying the car, that's what it's all about in the end Keep it up!

Saw this pop up on my facebook feed this morning.. looks fantastic

MY innovate box? O_O

Hey mate, welcome to the forum To start, being more careful would really be your best option, if you have adjustable suspension you could raise it up a little, that might help You have other options like increasing wheel size and/or Tyre profile, but that's your own decision, and might make things look a little funny Best of luck with it

Thanks mate, haha you're not the first to say, i honestly just think they look a whole lot better than the 25 ones that's all Thanks I'll post updates when i get them!

Save yourself the hassle man http://www.kudosmotorsports.com/catalog/advanced_search_result.php?keywords=timing&x=0&y=0

Are you sure your hoses are going into the correct ports on the solenoid? Any pics?

Righto! car is ready for tune! heading up to DVS JEZ on wednesday, hopefully all goes well.. Pretty keen to get back on the road, been a while! Here are some pics Got the cooling system being pressure tested, no leaks which is good Intercooler piping back in, gave it a hit with primer and some satin black paint to help tie it in with the black engine bay. The blue silicon joiners will get changed eventually, but the focus right now is getting it running.. I also painted the rocker covers again as the wrinkle didn't look too great.. Finished it off with a brand new R34 GTR ornament cover, because well it looks great in my opinion Looking good in the sun Celebrated with some chocolate lol

High flow stock 3076 T51R x2 high mount screamers out the bonnet

Go custom for sure, fabulous fabrications seems to have a pretty good rep up in QLD, the drifter guys swear by his work, check it out