AleksandarR33

They are an ok sequential, however this is about the shift inserts, if you look at the photos carefully they are from the last of the 5 speeds. pictured is the 3rd and 4th shift insert keys, 2 are in the pictures uploaded by the topic creator, This needs to be rectified otherwise He will cause more damage in the transmission pretty soon if he does some hard shifting. the inserts pictured are superseded and discontinued. The new keys you can get from Nissan are slightly different to the original found in factory gearboxes and are actually not right. The hump on the top of the superseded part is too large and the slot for the spring underneath is too small so you can’t lock the cir-clip inside it, only behind it. this is not efficient in hard shifting and can cause the keys to fall out even easier . try find someone that has the original part number, like you have shown in the photos. I would get new syncros and c clips and also a new shift sleeve whilst you are at it.

You guys need to take a good look at the pictures. There is no need to argue.

You guys should take a good solid look at the photo’s.

Wrong.. the ones you just shared are first and second gear, the ones the topic creator shared are third and fourth gear.

They are definitely for 3rd & 4th ( third and fourth gear ). 1st & 2nd don’t look anything like this.

You can fit the Z (R200V) CW&P into the regular R200 with minor work to the parts on a lathe.

They are shift inserts for 3rd & 4th gear, from month/year 06/97 onwards.

If you get stuck let me know, because ive built a few of these.