armbrusb

I have a BB VG30 on my RB20. It is laggy. I don't like it too much, but it sounds cool and is fun when it comes on (comes on kinda quick). What I particularly don't like is the fact that the 'snorkel' on the compressor outlet does not do a 90 degree bend. Does anyone know If I can put an RB25 elbow on the VG30 comp cover? Are the comp cover outlets the same? Can I put a RB25 comp cover straight onto my VG30 so that I get the neat right angle I am looking for? Thanks

Can you please tell me what size the outlet is on the RB25 turbo? That is, what is the diameter of the compressor outlet where the compressor housing meets the elbow. Thanks.

Please delete this thread.

I have an R32. I believe that the ground is the top-right wire when looking at the pump-side clip. It is a white wire which is thicker than the others. I think the others are as in this diagram Clip.bmp

What's going on? I am sure someone has one of these...

I have some Bilstien shocks that you can have for $50. One of them has a snapped shaft. The other is perfect. I am in Western Sydney. Call Bilstien to find out what the cost of replacing the shaft will be.

This has a polished finish. Comes with brass fittings to fit Skylines as the plastic ones it comes with are too small.

Where are you at. I am interested in the A-pillar interior piece on the drivers side and the interior pieces which surround the rear qtr windows.

What colour? Where are you? Do you have the interior A-pillar piece on the driver's side?

Bump.

Hi, where are you? Is the engine complete - that is, can it just be swapped over? How many KM?

Where are you? I am after a clean A pillar interior piece and the interior pieces that go around the rear quarter windows. Thanks.

Hi I am after the interior piece that goes on the driver's side A pillar and around both the left and right rear qtr windows as can been seen in the pic.

Where are you at? I am interested in the rear qtr upper interior pieces.

What colour

Hi, I am selling my wife's car. It is Mitsubishi Lancer GLXi 2001 coupe. Red in colour. 5 speed. 110,000km. My wife was the first owner of the car. It has a new clutch, is in very very good condition and is registered until Jan 06. The car has a Pioneer remote 6 stack CD player with Pioneer speakers all round. The car is in Erskine Park, Sydney. I am after $9,950. My number is 0401 896 663. Thanks.

AVO oil catch can. $100. There are screw fittings on the can which means that you can put whatever size outlets you like. I haven't cleaned it up yet - I will repost better pics when I have. RB20 stock ex manifold. $50. RB20DE cams. $25.

Hi, I would also like a pic of the triple guage holder to [email protected] Thanks.

As stated, I have some old-school TRX rims for sales. Average tyres, $150. 0401 896 663. Thanks, Ben.

As stated, I have some old-school TRX rims for sales. Average tyres, $150. 0401 896 663. Thanks, Ben.

Thanks. I'm not being cheeky, but why is it important to use DET pistons? Could I change the head gasket to change the comprssion ratio? The difference in the cost of the two engines is about $2,000. If I need to do more than change the head gasket that gap begins to close... I imagine it isn't cheap to have someone change the pistons?

I am considering an RB25 from an R33 for my R32 GTS4. My car has a 4WD sump which means that I can use a $1,000 RB25DE from an R33 GTS4 or a $3,000 RB25DET from a Stagea. I would prefer to spend $1,000 and put my RB20DET exhaust manifold and turbo straight on. I wonder what the difference in power would be. Does anyone have any ideas?

I'm after the piece around the window - thanks anyway!

I would like to buy one of these collect from someone in Sydney. I think that it is worth around $30.

I am after some rear mudflaps from a 4 door R32. I don't have a picture of what I am after, but they are kind of half black (rubber) and half white. $50. Thanks.