endless

Burrrrrrrnout nice

Nope So who is organising a 32 meet?? Keen for all 32 cruise

Yep was there on weekend!

34 N1's ~400rwhp on 1.2bar Just been taking care of most things that make 26s go boom aside from a rebuild. Little bit different to JZ motors i am used to!

GTS4/26 will bring along to the next meet..

my weapon of choice

Do want.. but cant have 4 cars

Shall come down for a looksee

Handy FAQ that has been made by a guy over here in Perth.. http://1jzmerc.com/hks-faq/home/

Is there a problem with the search function on the forums at the moment, every search i put in is no longer showing results. Searching for something as common as skyline does not give any results?

Ahh, after some more searching think i have found my problem; http://www.skylinesaustralia.com/forums/topic/328036-r32-hicas-pump-pressure-switch-replacement/ I found the bleed mico was talking about, here is a useful bleeding guide showing location. http://www.skylife4ever.com/2011/01/bleeding-attesa.html

Pull your 4WD fuse for now as this will stop it from leaking out any more fluid. I'd think the unit would be working as long as you didn't run it bone dry. I'd bleed it once leak fixed though. Just checked drivers side on mine... looks dry. Mines definitely the other side.

That's not my picture, just a borrowed one! You have to remove the diff to get to it. I will check mine on drivers side to see if it is wet there, mine is a pretty decent leak too as it drained the reservoir last time enough for the 4WD light to come on after a short time (only just got the system working due to other issues) Unfortunately for me, i have JUST replaced all the diff mounts so i had access to it but didn't know it was leaking!

Got a picture of where that is.. I thought it was on the bottom of the reservoir? That is the part that can be seen from the rear pass side and looks wet with fluid.

^ Exactly what i was thinking.. have seen it happen a few times with too much super fun happy static skid time

I got a set of injectors you can have for that. Shoot me a PM if you're keen.

Did you have any luck with this? If the wiring plug you are talking about is visible from the passenger side looking in from the rear then mine is leaking from the exact same spot.

I'm in too

Mines in bits at the moment, shit wasn't ready in time.. keen for another cruise though

Sorry should of specified also - it just does one clunk per 1 key turn. Gotta keep flicking key on and off to hear the clunk otherwise usually don't really hear it... just fuel pump working and dash lights on as usual. About to slap new box in so figured smart to replace starter if needed. But am leaning towards the relay path..

I have been having an intermittent problem with the starter motor not cranking over but lately it is happening more often. Symptom - i will turn the key, can hear the clunking of the starter but won't crank. Occasionally it will start no problem though... when it decides it will. So far things i have; Checked & cleaned starter connections Checked & cleaned earth points Installed new battery Without fail i have been able to get it to start by rolling the car a small amount - letting the clutch out to stop then turning the key. Also if i jump start it that will always get it cranking over, possibly also if i have immediately taken it off the battery charger (though haven't tried this enough) I am wondering if i should bother getting another starter or i should install a relay on the starter motor circuit. I have done a search and it seems the relay is a pretty common fix, i am a little hesitant as it does add another albeit small point of failure... It is an R32 also, so i suppose all of the wiring etc may be a little tired? Would like to know what others have done

Keen for group buy also

8th sounds good Pretty sure owner is on here somewhere, i recall seeing the 2530's & intake pipes from it for sale not long back.

Haven't really got any pics to post of mine.. really gotta sort that out soon!! Definitely be down for an all R32 cruise soon lads

You can get a pair of nismo afm's for less than that, they have Z32 internals in stock housings. On another note i have some afm's for sale from my BNR32 if you're keen.. shoot me a PM