DanEdser

Sorry I'm talking about on the rear, the sway bar link stud sticks up from the A arm. The front I used the factory stud and and used P clamps.

Hey guys, I've had a set of the GKTech braided brake lines installed on my r33 gtst for a while now, but my wof inspector has just picked up that they are fouling on the stud from the sway bar link and that it's a wof failure, now these hose are a different design to factory brake lines as it is one solid hose from chassis to brake caliper rather than having the box bolted to the caliper. Have any of you had this issue and if you have how did you fix it? I was thinking of using some P clamps but I cant see anywhere suitable to clamp it to without stretching and straining the hose Any help would be highly appreciated! Cheers

It was that easy! Thanks guys! Other clutches ive done havent had a nipple on master cylinder reservoir! Didnt even realise it was there.

I have not bled the master cylinder? I'm also struggling on finding any how-to's online on bleeding a master cylinder

Nope the GKTech kit replaced the damper, goes straight from the master cylinder to slave cylinder I'm thinking the fluid isnt entering the slave cylinder properly, as it bleeds from the bleed nipple with no air or anything, but doesn't seem to push the slave what-so-ever

I've bled it lots! almost gone through a whole bottle of brake fluid! Theres no air bubbles coming out of the bleed nipple D:

So I recently bought GKTech's braided clutch line for my r33 gts25t, installed it today, bled it from the slave cylinder properly using a vacuum bleeding kit, made sure there are no air bubbles, and now the clutch just goes straight to the floor! Anyone had this issue?? What is the fix??

Hey guys! Just finished my final project and I'm pretty pleased with it! Please let me know what you think!

Need one to Nistune my R33. Needs to be Part Number 23710-04UXX or MEC-R1XX or an early Z32 ECU. What have you got? Located in NZ but will pay postage if it's reasonably priced.

Hey! I'm on a few skyline forums but yet to sign up here haha. I'm originally from England but am living in Christchurch, NZ atm and have an ECR33. Have build threads here and there, might copy & paste one here if there is interest xD Have some pics because everyone likes pics! DSC08745 no plate by danedser, on Flickr DSC08724 by danedser, on Flickr DSC08781 no plates by danedser, on Flickr Also have some LM-GT2's that I'm trying to make fit xD original plan was use these as the rears then get some higher offset ones for the front... Untitled by danedser, on Flickr But then I decided to use those as fronts and get some lower offset ones for the rear and now this has happened xD Untitled by danedser, on Flickr Gonna need some guard rolling!