YangLIU

new Genuine TRUST GReddy AIRINX dry pod/mashroom air filter kit for Stagea M35 vq25det just fit once for show car, never run on the road come with all paper and box price $100 local pickup welcomed in inner west of Sydney can post with additional $10 for postage

80mm inlet, 70-80mm long. I bought 100mm long and cut to 90mm long and you can see the metal mount above bov return pipe is move forward a bit because the red silicon throttle coupler is too long

touchscreen for $10-20 from China. actually i was not aware the touchscreen is dead when i bought it

around $160-170. I saw some guys here bought new for $500?

does your consult3 could communicate with HICAS computer?

bought a cheap Greddy intelligent informeter touch, the touch screen is broken. ordered new touch screen from aliexpress.com and all sorted now.

info from NGK japan best to normal: RX -> MAX -> IX also add Japanese year converter: http://www.sljfaq.org/cgi/date.cgi?year=h14

you just need ISO adapter, no need to do hi - lo - hi connection.

OK, my cigarette is working well, just check it out the back of 110v socket, the wire lose, replug the wire could sort it. cheers mate.

You have Tesra everywhere

correct. i have seen the dash switcher once in Yahoo JP auction, it is Nissan OEM part.

sure, thanks for your help

no EVO wagon?

same as FKG OEMed NISMO one.

hmm, maybe. i need to use inverter during driving and most my appliance appliance apply 100-240v

oh right, i am quite lazy...

Hi all, does any know where the stock 100v converter fuse locate? my bad Japanese... my 100v converter is not working at all

PM me the price please, i wanna grab one mate.

i changed from Blitz plumb back --> Stock BOV --> Turbosmart Kompact plumb back Blitz is adjustable with soft spring --> has shudder (pigeon sound) Stock BOV --> big leak over 17-18 psi Turbosmart kompact --> has shudder (pigeon sound) i did some changes below: 1. keep BOV vacuumto plenum (no.1 in screenshot) 2. join stock ECU boost sensor with stock boost gauge sensor together and connect to plenum (keep using stock boost gauge sensor vacuum (no.2 in screenshot) 3. using a long vacuum pipe connect from stock ECU boost sensor vacuum source to intake pipe (share with stock boost controller solenoid) (no.3 in screenshot) that could slightly reduce the shudder but can't 100% sort it.

nope, just bought fake consult3 from aliexpress and want to scan for hicas error code.... don't want to pay much money to nissan for error code reading... currently i am using aftermarket ECU and i am not sure it is from hicas car or non hicas car. maybe i could switch back stock ECU then scan again?

Hi all, just got consult3 today and give a try on my M35. actually I have HICAS error code on dash that i want to scan. i found Consult3 will not scan HICAS module and i can't add HICAS module to scan list my consult3 version is v09.21.01.00.00 here are some screenshot on consult3: 1. choose M35 for scan, there is no manufacture date info 2. consult3 will add the modules for scan automatically. there is HICAS module but it will not add to scan list 3. consult3 could recognize 6 modules from my M35 for scan 4. here is the scan result and there is no hicas error anyone could tell me how to scan hicas error code with consult3?

you can buy HKS SLD (speed limit defencer) to unlock 180km/h if you can't find cheap aftermarket M35 ECU.

sorry mate, it doesn't mean info meter touch is unless, it is a good diag tool with big screen and could expand with many sensors. i just want to say not all people could afford such expensive luxury diag tool. (info touch + full harness and sensors)

Actually different ecu reader gives different info. From my experience, I like greddy infometer best because it could read injector usage percent.

I am also using aftermarket ecu right now. I just want to say the low value compare with the high price. I was not saying nismo ecu equal to emanage.